Tehnička dokumentacija
Tehnički podaci
Brand
STMicroelectronicsMotor Type
BLDC
Output Configuration
3 Phase
Maximum IGBT Collector Current
1.4A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
PowerSO
Maximum Operating Supply Voltage
52 V
Pin Count
36
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Maximum Operating Temperature
+150 °C
Length
16mm
Height
3.3mm
Width
11.1mm
Minimum Operating Temperature
-40 °C
Dimensions
16 x 11.1 x 3.3mm
Detalji o proizvodu
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.
Motor Controllers & Drivers, STMicroelectronics
KM 79,21
KM 15,84 Each (Supplied in a Tube) (bez PDV-a)
KM 92,68
KM 18,53 Each (Supplied in a Tube) (s PDV-om)
Proizvodno pakovanje (cijev)
5
KM 79,21
KM 15,84 Each (Supplied in a Tube) (bez PDV-a)
KM 92,68
KM 18,53 Each (Supplied in a Tube) (s PDV-om)
Proizvodno pakovanje (cijev)
5
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
količina | Jedinična cijena |
---|---|
5 - 9 | KM 15,84 |
10 - 24 | KM 14,86 |
25 - 49 | KM 13,98 |
50+ | KM 13,79 |
Tehnička dokumentacija
Tehnički podaci
Brand
STMicroelectronicsMotor Type
BLDC
Output Configuration
3 Phase
Maximum IGBT Collector Current
1.4A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
PowerSO
Maximum Operating Supply Voltage
52 V
Pin Count
36
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Maximum Operating Temperature
+150 °C
Length
16mm
Height
3.3mm
Width
11.1mm
Minimum Operating Temperature
-40 °C
Dimensions
16 x 11.1 x 3.3mm
Detalji o proizvodu
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.