3M Polishing Film

RS kataloški broj:: 267-8144brend: 3MProizvođački broj:: 254X ILF AO 2MIL TR3
brand-logo
Prikaži sve u Polishing & Finishing Accessories

Tehnička dokumentacija

Tehnički podaci

Brand

3M

Series

254X

Zemlja podrijetla

United States

Detalji o proizvodu

3M ST, SC and LC Hot Melt Fibre Optic Connectors

Hot Melt ST, SC and LC fibre optic connectors have pre-loaded adhesive within pre-radiused PC zirconia ceramic ferrules, allowing faster installation than standard connectors that need adhesive preparation and injection. The adhesive of these Hot Melt ST and SC fibre optic connectors is resettable, allowing greater scope for adjustments during assembly.

Hot Melt ST and SC fibre optic connectors only require one stage of polishing using a polishing puck for both connector types (stock number 267-8122) and one grade of polishing film (stock number 267-8144). A polishing pad is also available (see stock number 267-8138) and a SC Hot Melt connector cooling stand (stock number 267-8087) for retaining assembled SC Hot Melt connectors immediately after curing. These Hot Melt fibre optic connectors accept multi-mode 125 micron fibre cables with sheath diameters to 3mm and, once installed, provide a low loss, mechanically stable assembly.

The SC Hot Melt connector requires a crimp tool stock no. 267-8100 to terminate the body via a crimp ring to cable.

Informacije o stanju skladišta trenutno nisu dostupne.

Proverite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

RSD 258,657

komad (u vrečici od 50) (bez PDV-a)

RSD 310,388

komad (u vrečici od 50) (s PDV-om)

3M Polishing Film

50

Dostupno u više komada 50
50RSD 12.933
100RSD 25.866
150RSD 38.799
200RSD 51.731
250RSD 64.664
300RSD 77.597
350RSD 90.530
400RSD 103.463
450RSD 116.396
500RSD 129.329
550RSD 142.261
600RSD 155.194
650RSD 168.127
700RSD 181.060
750RSD 180.276

RSD 258,657

komad (u vrečici od 50) (bez PDV-a)

RSD 310,388

komad (u vrečici od 50) (s PDV-om)

3M Polishing Film
Informacije o stanju skladišta trenutno nisu dostupne.

50

Dostupno u više komada 50
50RSD 12.933
100RSD 25.866
150RSD 38.799
200RSD 51.731
250RSD 64.664
300RSD 77.597
350RSD 90.530
400RSD 103.463
450RSD 116.396
500RSD 129.329
550RSD 142.261
600RSD 155.194
650RSD 168.127
700RSD 181.060
750RSD 180.276

Kupujte na veliko

količinaJedinična cenaPo kesa
50 - 700RSD 258,657RSD 12.933
750 - 2450RSD 240,368RSD 12.018
2500+RSD 231,224RSD 11.561

Tehnička dokumentacija

Tehnički podaci

Brand

3M

Series

254X

Zemlja podrijetla

United States

Detalji o proizvodu

3M ST, SC and LC Hot Melt Fibre Optic Connectors

Hot Melt ST, SC and LC fibre optic connectors have pre-loaded adhesive within pre-radiused PC zirconia ceramic ferrules, allowing faster installation than standard connectors that need adhesive preparation and injection. The adhesive of these Hot Melt ST and SC fibre optic connectors is resettable, allowing greater scope for adjustments during assembly.

Hot Melt ST and SC fibre optic connectors only require one stage of polishing using a polishing puck for both connector types (stock number 267-8122) and one grade of polishing film (stock number 267-8144). A polishing pad is also available (see stock number 267-8138) and a SC Hot Melt connector cooling stand (stock number 267-8087) for retaining assembled SC Hot Melt connectors immediately after curing. These Hot Melt fibre optic connectors accept multi-mode 125 micron fibre cables with sheath diameters to 3mm and, once installed, provide a low loss, mechanically stable assembly.

The SC Hot Melt connector requires a crimp tool stock no. 267-8100 to terminate the body via a crimp ring to cable.