Tehnička dokumentacija
Tehnički podaci
Type
Switched Mode
Output Voltage
24V dc
Output Current
10A
AC or DC Output Voltage
dc
Input Voltage
400V ac
Power Rating
240W
Electrical Phase
2, 3
Number of Outputs
1
Height
143mm
Width
65mm
Depth
143mm
Series
EMPARRO
Mounting Type
DIN Rail Mount
Minimum Temperature
-40°C
Ripple And Noise
20mV ac
MTBF
>1000000h
Output Voltage Adjustment Range
24 → 28V
Special Features
Optimum Performance, Reliable, Space Saving
Maximum Temperature
+70°C
Standards Met
cULus, cULus Recognised, EN 55011 B, EN 60715, EN 60950-1, EN 61000-3-2, EN 61204-3, SEMI F47
Zemlja podrijetla
Czech Republic
Detalji o proizvodu
Emparro Power Supply 1 and 3 Phase
Murrelektroniks Emparro SMPS units have an efficiency rate of up to 95% keeping power loss and energy consumption to a minimum saving you money.
A higher efficiency rating results in minimum power loss, which equates to reduced operating costs. Emparros lower operating temperature reduces heat build-up in the cabinet ensuring that the device, and the components installed around it are not affected. Therefore, control cabinets with smaller dimensions can be used.
The device supplies up to 50% more power to start up higher loads and capacities without using another power supply.
The output voltage is controlled with a constant current when there is an overload. It is limited to 100% of the nominal current (or to 150% in Power boost mode). The power supply is then protected from damage.
Switch Mode - Murrelektronik
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 58.002
Each (bez PDV-a)
RSD 69.602
Each (s PDV-om)
1
RSD 58.002
Each (bez PDV-a)
RSD 69.602
Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Type
Switched Mode
Output Voltage
24V dc
Output Current
10A
AC or DC Output Voltage
dc
Input Voltage
400V ac
Power Rating
240W
Electrical Phase
2, 3
Number of Outputs
1
Height
143mm
Width
65mm
Depth
143mm
Series
EMPARRO
Mounting Type
DIN Rail Mount
Minimum Temperature
-40°C
Ripple And Noise
20mV ac
MTBF
>1000000h
Output Voltage Adjustment Range
24 → 28V
Special Features
Optimum Performance, Reliable, Space Saving
Maximum Temperature
+70°C
Standards Met
cULus, cULus Recognised, EN 55011 B, EN 60715, EN 60950-1, EN 61000-3-2, EN 61204-3, SEMI F47
Zemlja podrijetla
Czech Republic
Detalji o proizvodu
Emparro Power Supply 1 and 3 Phase
Murrelektroniks Emparro SMPS units have an efficiency rate of up to 95% keeping power loss and energy consumption to a minimum saving you money.
A higher efficiency rating results in minimum power loss, which equates to reduced operating costs. Emparros lower operating temperature reduces heat build-up in the cabinet ensuring that the device, and the components installed around it are not affected. Therefore, control cabinets with smaller dimensions can be used.
The device supplies up to 50% more power to start up higher loads and capacities without using another power supply.
The output voltage is controlled with a constant current when there is an overload. It is limited to 100% of the nominal current (or to 150% in Power boost mode). The power supply is then protected from damage.