Phoenix Contact MINI MCR Series Signal Conditioner, Resistance Input, Current, Voltage Output, 24V dc Supply, ATEX
Tehnička dokumentacija
Tehnički podaci
Brand
Phoenix ContactModule Type
Resistance/Potiposition Transducer
Input Signal Type
Resistance
Output Signal Type
Current, Voltage
Input Range
100 → 100000 Ω
Output Range
0 → 10 V, 0 → 20mA
Supply Voltage
24V dc
Hazardous Area Certification
ATEX
Mounting Type
DIN Rail Mount
Operating Temperature Range
-20 → +65°C
Series
MINI MCR
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+65°C
Distrelec Product Id
17689719
Zemlja podrijetla
Germany
Detalji o proizvodu
Resistance to Current/Voltage Converter
From Phoneix Contact, the DIN-Rail mounted slim MINI MCR-SL-R-UI resistance transducer converts potentiometer positions as a percentage to an analogue standard signal. If the potentiometer range cannot be utilized to the full, an externally accessible slide switch is used to set the upper and lower potiposition end values. The output signal between 0 and 100% is based on this fixed end value.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 54.159
RSD 54.159 Each (bez PDV-a)
RSD 64.990
RSD 64.990 Each (s PDV-om)
1
RSD 54.159
RSD 54.159 Each (bez PDV-a)
RSD 64.990
RSD 64.990 Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Brand
Phoenix ContactModule Type
Resistance/Potiposition Transducer
Input Signal Type
Resistance
Output Signal Type
Current, Voltage
Input Range
100 → 100000 Ω
Output Range
0 → 10 V, 0 → 20mA
Supply Voltage
24V dc
Hazardous Area Certification
ATEX
Mounting Type
DIN Rail Mount
Operating Temperature Range
-20 → +65°C
Series
MINI MCR
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+65°C
Distrelec Product Id
17689719
Zemlja podrijetla
Germany
Detalji o proizvodu
Resistance to Current/Voltage Converter
From Phoneix Contact, the DIN-Rail mounted slim MINI MCR-SL-R-UI resistance transducer converts potentiometer positions as a percentage to an analogue standard signal. If the potentiometer range cannot be utilized to the full, an externally accessible slide switch is used to set the upper and lower potiposition end values. The output signal between 0 and 100% is based on this fixed end value.