RS PRO 1μF Aluminium Electrolytic Capacitor 100V dc, Radial, Through Hole
![brand-logo](https://media.rs-online.com/brand/M3385-01.jpg)
Tehnička dokumentacija
Tehnički podaci
Polarised
Polar
Dimensions (L x W x H)
94 x 94 x45mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+105°C
Leakage Current
<=0.01 CV or 3 μA @ 1 min
Lead Pitch
2mm
Diameter
5mm
USB Version
USB2.0
Lifetime
1000h
Capacitance
1µF
Tolerance
±20%
Dissipation Factor
10%
Voltage
100V dc
Length
11mm
Height
11mm
Series
RS
Dimensions
5 (Dia.) x 11mm
Ripple Current
15mA
Brand
RS ProZemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
Corintech FilesThruTheAir WiFi-Alert Monitoring System
The WiFi-Alert is a standalone monitoring system for all data loggers in the FilesThruTheAir™ WiFi range. The WiFi-Alert will receive alarm messages from any FilesThruTheAir™ WiFi sensor connected to the same wireless network. The WiFi-Alert indicates an alarm activation using high brightness LEDs and a choice of 9 alarm tones. The WiFi-Alert will also continue to work when the PC is turned off.
The WiFi-Alert has been designed to be continuously powered via the mains however it does contain a rechargeable lithium polymer battery for device positioning and limited power during the event of a mains failure.
The audible alarm can be muted by pressing the WiFi-Alert button once or remotely from the PC software. There is also a configurable auto-mute function.
After initial set-up audible and visual alerts can be reconfigured wirelessly from the PC software. The audible and visual WiFi signal strength indicator is activated by pressing the WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.
The WiFi-Alert has an IP44 rating and can be attached to a wall or flat surface using the bracket or adhesive pad provided. It is also supplied with a micro USB lead and mains charger.
Supplied with
Micro USB lead, wall bracket, sticky pad, rechargeable Lithium Polymer battery, mains charger
Standards
IEEE 802.11
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 0,303
komadno (u pakovanju od 100) (bez PDV-a)
KM 0,354
komadno (u pakovanju od 100) (s PDV-om)
Standard
100
KM 0,303
komadno (u pakovanju od 100) (bez PDV-a)
KM 0,354
komadno (u pakovanju od 100) (s PDV-om)
Standard
100
Kupujte na veliko
količina | Jedinična cijena | Po pakovanje |
---|---|---|
100 - 400 | KM 0,303 | KM 30,28 |
500+ | KM 0,281 | KM 28,12 |
Tehnička dokumentacija
Tehnički podaci
Polarised
Polar
Dimensions (L x W x H)
94 x 94 x45mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+105°C
Leakage Current
<=0.01 CV or 3 μA @ 1 min
Lead Pitch
2mm
Diameter
5mm
USB Version
USB2.0
Lifetime
1000h
Capacitance
1µF
Tolerance
±20%
Dissipation Factor
10%
Voltage
100V dc
Length
11mm
Height
11mm
Series
RS
Dimensions
5 (Dia.) x 11mm
Ripple Current
15mA
Brand
RS ProZemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
Corintech FilesThruTheAir WiFi-Alert Monitoring System
The WiFi-Alert is a standalone monitoring system for all data loggers in the FilesThruTheAir™ WiFi range. The WiFi-Alert will receive alarm messages from any FilesThruTheAir™ WiFi sensor connected to the same wireless network. The WiFi-Alert indicates an alarm activation using high brightness LEDs and a choice of 9 alarm tones. The WiFi-Alert will also continue to work when the PC is turned off.
The WiFi-Alert has been designed to be continuously powered via the mains however it does contain a rechargeable lithium polymer battery for device positioning and limited power during the event of a mains failure.
The audible alarm can be muted by pressing the WiFi-Alert button once or remotely from the PC software. There is also a configurable auto-mute function.
After initial set-up audible and visual alerts can be reconfigured wirelessly from the PC software. The audible and visual WiFi signal strength indicator is activated by pressing the WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.
The WiFi-Alert has an IP44 rating and can be attached to a wall or flat surface using the bracket or adhesive pad provided. It is also supplied with a micro USB lead and mains charger.
Supplied with
Micro USB lead, wall bracket, sticky pad, rechargeable Lithium Polymer battery, mains charger
Standards
IEEE 802.11