RS PRO Bootlace Ferrule, 12mm Pin Length, 3.5mm Pin Diameter, 6mm² Wire Size, Silver
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProMaximum Wire Size mm²
6mm²
Maximum Wire Size (mm²)
6mm²
Pin Diameter
3.5 mm, 3.9mm
Number of Entries
1
Colour
Silver
Pin Length
12mm
Insulation
Uninsulated
Maximum Wire Size AWG
10AWG
Maximum Wire Size (AWG)
10AWG
Overall Length
12mm
Minimum Wire Size mm²
6mm²
Minimum Wire Size (mm²)
6mm²
Minimum Wire Size AWG
10AWG
Minimum Wire Size (AWG)
10AWG
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
RS Pro Uninsulated Bootlace Ferrules
From RS Pro a range of high-quality uninsulated bootlace ferrules (also known as cord end terminals) for providing an economical and effective method of terminating multi-stranded wires. These reliable wire ferrules ensure that you have a positive connection when connecting wires to terminal blocks and captive terminals.
What Is a Bootlace Ferrule?
A bootlace ferrule is a metal tube or ferrule with (or without) a moulded colour coded insulating collar made from nylon. The ferrule is slipped over the end of a multi-stranded wire, crimped and then inserted into a screw or spring clamp connection.
Where is a Bootlace Ferrule Used?
When the end of a multi-stranded wire is stripped and placed directly under a screw terminal the strands of the wire will naturally fan out under the pressure of the screw. Some strands will go astray. This reduces the quality of the electrical connection and can also result in electrical shorts. When a bootlace ferrule is used it's flared design captures all the strands. These strands are then crimped together in the ferrule tube. The crimped ferrule is then inserted into the terminal to create an electrical connection
Features and Benefits
Excellent electrical connection
Reduces short circuits
Tin plated copper tube for excellent conductivity
Crimped terminal can be repeatedly inserted and removed without degrading end of the wire
Applications
Bootlace ferrules are used on multi-stranded wires that are being inserted into screw terminals and terminal blocks. Applications include consumer units, circuit breakers, electrical control panels and any equipment where there is a requirement for a multi-stranded wire connection.
How to Crimp a Bootlace Ferrule
How to Crimp a Bootlace Ferrule
Select the correct size bootlace ferrule and strip the end of the wire. Cut the wires to the same length as terminal and twist the strands together. Slip the bootlace ferrule onto the ends of the wire until the wire strands are flush with the end of the tube. Using a ratchet crimping tool, insert the metal tube of the ferrule into the appropriate crimping section (indicated by sizes marked on the tool). Squeeze the tool handles together until the ratchet releases. A ratchet crimping tool is preferable as the handles will remain locked until a full crimp cycle is completed preventing partial crimps. The crimped wire end is now ready to be inserted into connecting terminal
Suitable Crimping Tools
For ferrules with a wire size range of 0.25 to 6 mm2 use crimping tool frame stock number 848-391 with crimping die 848-420
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 14,37
komad (u vrečici od 500) (bez PDV-a)
RSD 17,244
komad (u vrečici od 500) (s PDV-om)
500
RSD 14,37
komad (u vrečici od 500) (bez PDV-a)
RSD 17,244
komad (u vrečici od 500) (s PDV-om)
500
Kupujte na veliko
količina | Jedinična cena | Po kesa |
---|---|---|
500 - 4500 | RSD 14,37 | RSD 7.185 |
5000 - 9500 | RSD 13,063 | RSD 6.532 |
10000+ | RSD 10,451 | RSD 5.225 |
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProMaximum Wire Size mm²
6mm²
Maximum Wire Size (mm²)
6mm²
Pin Diameter
3.5 mm, 3.9mm
Number of Entries
1
Colour
Silver
Pin Length
12mm
Insulation
Uninsulated
Maximum Wire Size AWG
10AWG
Maximum Wire Size (AWG)
10AWG
Overall Length
12mm
Minimum Wire Size mm²
6mm²
Minimum Wire Size (mm²)
6mm²
Minimum Wire Size AWG
10AWG
Minimum Wire Size (AWG)
10AWG
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
RS Pro Uninsulated Bootlace Ferrules
From RS Pro a range of high-quality uninsulated bootlace ferrules (also known as cord end terminals) for providing an economical and effective method of terminating multi-stranded wires. These reliable wire ferrules ensure that you have a positive connection when connecting wires to terminal blocks and captive terminals.
What Is a Bootlace Ferrule?
A bootlace ferrule is a metal tube or ferrule with (or without) a moulded colour coded insulating collar made from nylon. The ferrule is slipped over the end of a multi-stranded wire, crimped and then inserted into a screw or spring clamp connection.
Where is a Bootlace Ferrule Used?
When the end of a multi-stranded wire is stripped and placed directly under a screw terminal the strands of the wire will naturally fan out under the pressure of the screw. Some strands will go astray. This reduces the quality of the electrical connection and can also result in electrical shorts. When a bootlace ferrule is used it's flared design captures all the strands. These strands are then crimped together in the ferrule tube. The crimped ferrule is then inserted into the terminal to create an electrical connection
Features and Benefits
Excellent electrical connection
Reduces short circuits
Tin plated copper tube for excellent conductivity
Crimped terminal can be repeatedly inserted and removed without degrading end of the wire
Applications
Bootlace ferrules are used on multi-stranded wires that are being inserted into screw terminals and terminal blocks. Applications include consumer units, circuit breakers, electrical control panels and any equipment where there is a requirement for a multi-stranded wire connection.
How to Crimp a Bootlace Ferrule
How to Crimp a Bootlace Ferrule
Select the correct size bootlace ferrule and strip the end of the wire. Cut the wires to the same length as terminal and twist the strands together. Slip the bootlace ferrule onto the ends of the wire until the wire strands are flush with the end of the tube. Using a ratchet crimping tool, insert the metal tube of the ferrule into the appropriate crimping section (indicated by sizes marked on the tool). Squeeze the tool handles together until the ratchet releases. A ratchet crimping tool is preferable as the handles will remain locked until a full crimp cycle is completed preventing partial crimps. The crimped wire end is now ready to be inserted into connecting terminal
Suitable Crimping Tools
For ferrules with a wire size range of 0.25 to 6 mm2 use crimping tool frame stock number 848-391 with crimping die 848-420