RS PRO E10 Indicator Light, Clear, 24 V, 120 mA, 3000h
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProVoltage Rating
24 V
Lamp Base
E10
Current Rating
120 mA
Diameter
10mm
Lamp Size
T3 1/4
Length
28 mm
Lens Colour
Clear
Luminosity
12 lm
Life Hours
3000h
Zemlja podrijetla
Korea, Republic Of
Detalji o proizvodu
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 205,097
komadno (u pakovanju od 10) (bez PDV-a)
RSD 246,116
komadno (u pakovanju od 10) (s PDV-om)
10
RSD 205,097
komadno (u pakovanju od 10) (bez PDV-a)
RSD 246,116
komadno (u pakovanju od 10) (s PDV-om)
10
Kupujte na veliko
| količina | Jedinična cena | Po pakovanje |
|---|---|---|
| 10 - 90 | RSD 205,097 | RSD 2.051 |
| 100 - 490 | RSD 188,114 | RSD 1.881 |
| 500 - 990 | RSD 163,294 | RSD 1.633 |
| 1000+ | RSD 158,068 | RSD 1.581 |
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProVoltage Rating
24 V
Lamp Base
E10
Current Rating
120 mA
Diameter
10mm
Lamp Size
T3 1/4
Length
28 mm
Lens Colour
Clear
Luminosity
12 lm
Life Hours
3000h
Zemlja podrijetla
Korea, Republic Of
Detalji o proizvodu
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.