Sensata Cynergy3 SSF67 Series Vertical Stainless Steel Float Switch, Dual Switch Point Float, 1m Cable, Direct Load,
Tehnička dokumentacija
Tehnički podaci
Brand
Sensata / Cynergy3Device Type
Dual Switch Point Float
Mounting Type
Vertical
Switch Output
Direct Load
Body Material
Stainless Steel
Cable Length
1m
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+135°C
Maximum ac Voltage
250V
Maximum dc Voltage
120V
Maximum Current
600 mA
Maximum Pressure
10bar
Gasket Material
Nitrile
Series
SSF67
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
Dual Position Stainless Steel Float Switch
Designed to give the user a number of switching options to cater for a variety of system requirements. These switches are most suited for use with aggressive liquids and hygienic applications.
Warning
The Cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 50.978
Each (bez PDV-a)
RSD 61.173
Each (s PDV-om)
1
RSD 50.978
Each (bez PDV-a)
RSD 61.173
Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Brand
Sensata / Cynergy3Device Type
Dual Switch Point Float
Mounting Type
Vertical
Switch Output
Direct Load
Body Material
Stainless Steel
Cable Length
1m
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+135°C
Maximum ac Voltage
250V
Maximum dc Voltage
120V
Maximum Current
600 mA
Maximum Pressure
10bar
Gasket Material
Nitrile
Series
SSF67
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
Dual Position Stainless Steel Float Switch
Designed to give the user a number of switching options to cater for a variety of system requirements. These switches are most suited for use with aggressive liquids and hygienic applications.
Warning
The Cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.