TE Connectivity Transparent Polyolefin Solder Sleeve 35.5mm Length 4 → 11.5mm Cable Diameter
Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivityMinimum Cable Diameter
4mm
Maximum Cable Diameter
11.5mm
Sleeve Length
35.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
2
Colour
Transparent
Shrink Temperature
+85°C
Series
B-155
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Zemlja podrijetla
Mexico
Detalji o proizvodu
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 681,914
komadno (u pakovanju od 25) (bez PDV-a)
RSD 818,297
komadno (u pakovanju od 25) (s PDV-om)
25
RSD 681,914
komadno (u pakovanju od 25) (bez PDV-a)
RSD 818,297
komadno (u pakovanju od 25) (s PDV-om)
25
Kupujte na veliko
| količina | Jedinična cena | Po pakovanje |
|---|---|---|
| 25 - 350 | RSD 681,914 | RSD 17.048 |
| 375 - 1225 | RSD 657,094 | RSD 16.427 |
| 1250+ | RSD 649,255 | RSD 16.231 |
Tehnička dokumentacija
Tehnički podaci
Brand
TE ConnectivityMinimum Cable Diameter
4mm
Maximum Cable Diameter
11.5mm
Sleeve Length
35.5mm
Material
Polyolefin
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+125°C
Quantity
2
Colour
Transparent
Shrink Temperature
+85°C
Series
B-155
Standards Met
ANSI J-STD-004, ANSI J-STD-006
Zemlja podrijetla
Mexico
Detalji o proizvodu
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.