Tehnička dokumentacija
Tehnički podaci
Brand
ADAFRUIT INDUSTRIESClassification
Development Board
Kit Name
GEMMA V2
Technology
Wearable
Processor Part Number
ATtiny85
Processor Type
MCU
Detalji o proizvodu
Adafruit GEMMA Wearable Platform v2
GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.
This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.
The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.
Adafruit GEMMA Wearable Platform
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 2.155
Each (bez PDV-a)
RSD 2.587
Each (s PDV-om)
1
RSD 2.155
Each (bez PDV-a)
RSD 2.587
Each (s PDV-om)
1
Kupujte na veliko
količina | Jedinična cena |
---|---|
1 - 4 | RSD 2.155 |
5 - 9 | RSD 1.894 |
10+ | RSD 1.731 |
Tehnička dokumentacija
Tehnički podaci
Brand
ADAFRUIT INDUSTRIESClassification
Development Board
Kit Name
GEMMA V2
Technology
Wearable
Processor Part Number
ATtiny85
Processor Type
MCU
Detalji o proizvodu
Adafruit GEMMA Wearable Platform v2
GEMMA is a tiny wearable platform built on a round 1.1 inch (2.8 cm) diameter board. The microcontroller at the heart of GEMMA is the Atmel Attiny85 8-bit MCU and is programmable with an Arduino IDE over USB.
This, the second generation of GEMMA, is physically and code-wise identical to the original but now has a Micro-B USB connector and an On-Off switch. It was designed mainly for wearable applications but its small size and low cost makes it great for a wide range of portable projects.
The Attiny85 processor has 8K of flash and 5 I/O pins, including analogue inputs and PWM outputs. There is a USB bootloader available from Adafruit.com but although you can program GEMMA using the Arduino IDE, it is not fully 100% Arduino compatible.