Tehnička dokumentacija
Tehnički podaci
Inside Diameter
12mm
Outside Diameter
22mm
Length
32mm
Linear Bearing Type
Linear Ball Bearing
Linear Ball Bearing Type
Closed
Seals
Without Seals
Dynamic Load Rating
1080N
Static Load Rating
815N
Zemlja podrijetla
Germany
Detalji o proizvodu
Linear bearings, LBCD
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 10.059
Each (bez PDV-a)
RSD 12.071
Each (s PDV-om)
1
RSD 10.059
Each (bez PDV-a)
RSD 12.071
Each (s PDV-om)
1
Kupujte na veliko
količina | Jedinična cena |
---|---|
1 - 4 | RSD 10.059 |
5+ | RSD 9.732 |
Tehnička dokumentacija
Tehnički podaci
Inside Diameter
12mm
Outside Diameter
22mm
Length
32mm
Linear Bearing Type
Linear Ball Bearing
Linear Ball Bearing Type
Closed
Seals
Without Seals
Dynamic Load Rating
1080N
Static Load Rating
815N
Zemlja podrijetla
Germany
Detalji o proizvodu
Linear bearings, LBCD
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.