Festo Pressure Sensor, 30V dc, IP40 1 bar

RS kataloški broj:: 175-2231brend: FestoProizvođački broj:: SPAN-B2R-R18M-PNLK-PNVBA-L1
brand-logo
Prikaži sve u Pneumatic Pressure Sensors

Tehnička dokumentacija

Tehnički podaci

Brand

Festo

Suitable Media

Air

Maximum Operating Pressure

1 bar

Minimum Operating Pressure

-1bar

Port Connection

M5 (Internal), R1/8 (External)

Supply Voltage

30V dc

IP Rating

IP40

Minimum Operating Temperature

0°C

Maximum Operating Temperature

+50°C

Zemlja podrijetla

Bulgaria

Detalji o proizvodu

Festo SPAN Series Pressure Sensors

Festo SPAN series pressure sensors for monitoring compressed air and non-corrosive gases. The measuring method is based on a piezoresistive measuring cell for relative pressure measurement. Pressure values are transmitted to the connected control system as a switching signal, as an analogue signal or via IO-Link depending on the sensor variant and selected parameters.

Informacije o stanju skladišta trenutno nisu dostupne.

Proverite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

RSD 26.388

Each (bez PDV-a)

RSD 31.666

Each (s PDV-om)

Festo Pressure Sensor, 30V dc, IP40 1 bar

RSD 26.388

Each (bez PDV-a)

RSD 31.666

Each (s PDV-om)

Festo Pressure Sensor, 30V dc, IP40 1 bar
Informacije o stanju skladišta trenutno nisu dostupne.

Tehnička dokumentacija

Tehnički podaci

Brand

Festo

Suitable Media

Air

Maximum Operating Pressure

1 bar

Minimum Operating Pressure

-1bar

Port Connection

M5 (Internal), R1/8 (External)

Supply Voltage

30V dc

IP Rating

IP40

Minimum Operating Temperature

0°C

Maximum Operating Temperature

+50°C

Zemlja podrijetla

Bulgaria

Detalji o proizvodu

Festo SPAN Series Pressure Sensors

Festo SPAN series pressure sensors for monitoring compressed air and non-corrosive gases. The measuring method is based on a piezoresistive measuring cell for relative pressure measurement. Pressure values are transmitted to the connected control system as a switching signal, as an analogue signal or via IO-Link depending on the sensor variant and selected parameters.