INA HFL1626-L564 Sprag Clutch Bearing 16mm I.D., 22mm O.D., 26mm Race Width
Tehnička dokumentacija
Tehnički podaci
Brand
INAInside Diameter
16mm
Outside Diameter
22mm
Torque
20.5Nm
Race Width
26mm
Series
HFL
Over-running Speed
7500 rpm, 8500 rpm
Dynamic Load Rating
7400N
Static Load Rating
9000N
Zemlja podrijetla
Germany
Detalji o proizvodu
Drawn Cup Roller Clutches
INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in one direction and are compact in a radial direction.
Drawn cup roller clutches give precise indexing, since the individual spring loading of the needle rollers ensures continuous contact between the shaft, needle rollers and ramps. They allow high indexing frequencies due to their low mass and the resulting low moment of inertia of the clamping elements. They also have a low overrunning frictional torque.
INA
RSD 5.559
RSD 5.559 Each (bez PDV-a)
RSD 6.670
RSD 6.670 Each (s PDV-om)
1
RSD 5.559
RSD 5.559 Each (bez PDV-a)
RSD 6.670
RSD 6.670 Each (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Informacije o stanju skladišta trenutno nisu dostupne.
| količina | Jedinična cena |
|---|---|
| 1 - 4 | RSD 5.559 |
| 5+ | RSD 5.410 |
Tehnička dokumentacija
Tehnički podaci
Brand
INAInside Diameter
16mm
Outside Diameter
22mm
Torque
20.5Nm
Race Width
26mm
Series
HFL
Over-running Speed
7500 rpm, 8500 rpm
Dynamic Load Rating
7400N
Static Load Rating
9000N
Zemlja podrijetla
Germany
Detalji o proizvodu
Drawn Cup Roller Clutches
INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in one direction and are compact in a radial direction.
Drawn cup roller clutches give precise indexing, since the individual spring loading of the needle rollers ensures continuous contact between the shaft, needle rollers and ramps. They allow high indexing frequencies due to their low mass and the resulting low moment of inertia of the clamping elements. They also have a low overrunning frictional torque.