InvenSense Omni-Directional, Surface Mount Microphone Condenser -27 → -25dB
Tehnička dokumentacija
Tehnički podaci
Brand
InvenSenseSensitivity
-27 → -25dB
Directivity
Omni-Directional
Standard Operating Voltage
1.62 → 3.63V
Mounting Type
Surface Mount
Signal to Noise Ratio
65dB(A)
Maximum Supply Current
24µA
Dimensions
4 x 3 x 1mm
Height
1mm
Maximum Frequency
20kHz
Maximum Operating Temperature
+85°C
Minimum Frequency
50Hz
Minimum Operating Temperature
-40°C
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
Digital MEMS Microphone - ICS-43432, InvenSense
The ICS-43432 is a low-noise MEMS microphone with an I2S digital output. The InvenSense digital microphone ICS43432 has fully decimated outputs that allow them to be connected directly into microcontrollers (MCU) and DSPs. The device contains a MEMS sensor, an analog to digital converter, signal conditioning, decimation and anti-aliasing filters along with a 24-bit I2S interface.
The digital microphone is bottom ported and has a high signal to noise ratio (SNR) along with a wideband frequency response It is also perfect when an audio codec design is not needed. The applications include wearables, remote controls, teleconferencing systems, gaming consoles, security systems, and microphone arrays.
Audio & Acoustic Sensors, Invensense
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
P.O.A.
5000
P.O.A.
5000
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Brand
InvenSenseSensitivity
-27 → -25dB
Directivity
Omni-Directional
Standard Operating Voltage
1.62 → 3.63V
Mounting Type
Surface Mount
Signal to Noise Ratio
65dB(A)
Maximum Supply Current
24µA
Dimensions
4 x 3 x 1mm
Height
1mm
Maximum Frequency
20kHz
Maximum Operating Temperature
+85°C
Minimum Frequency
50Hz
Minimum Operating Temperature
-40°C
Zemlja podrijetla
Taiwan, Province Of China
Detalji o proizvodu
Digital MEMS Microphone - ICS-43432, InvenSense
The ICS-43432 is a low-noise MEMS microphone with an I2S digital output. The InvenSense digital microphone ICS43432 has fully decimated outputs that allow them to be connected directly into microcontrollers (MCU) and DSPs. The device contains a MEMS sensor, an analog to digital converter, signal conditioning, decimation and anti-aliasing filters along with a 24-bit I2S interface.
The digital microphone is bottom ported and has a high signal to noise ratio (SNR) along with a wideband frequency response It is also perfect when an audio codec design is not needed. The applications include wearables, remote controls, teleconferencing systems, gaming consoles, security systems, and microphone arrays.
Audio & Acoustic Sensors, Invensense
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda