Tehnička dokumentacija
Tehnički podaci
Brand
LegrisConnector A
G 3/8 Female
Connector B
Push In 10 mm
Pneumatic Fitting Type
Bulkhead Threaded-to-Tube Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
G 3/8 Female
Manufacturer Series
LF3000
Thread Material
Brass
Body Material
Brass
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Finish
Nickel Plated
Maximum Operating Pressure
20 bar
Threaded Connection A
G 3/8 Female
Zemlja podrijetla
France
Detalji o proizvodu
Bulkhead Adaptor - Parallel Thread-to-Tube
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
These fitting connect tubing with a male thread through the installation panel and provide an excellent seal between the panel and fitting.
Bulkhead Adaptors and Manifolds
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 2.318,769
komadno (u pakovanju od 2) (bez PDV-a)
RSD 2.782,523
komadno (u pakovanju od 2) (s PDV-om)
2
RSD 2.318,769
komadno (u pakovanju od 2) (bez PDV-a)
RSD 2.782,523
komadno (u pakovanju od 2) (s PDV-om)
2
Kupujte na veliko
količina | Jedinična cena | Po pakovanje |
---|---|---|
2 - 8 | RSD 2.318,769 | RSD 4.638 |
10+ | RSD 2.253,452 | RSD 4.507 |
Tehnička dokumentacija
Tehnički podaci
Brand
LegrisConnector A
G 3/8 Female
Connector B
Push In 10 mm
Pneumatic Fitting Type
Bulkhead Threaded-to-Tube Adaptor
Connection Style
Threaded-to-Tube
Threaded Connection
G 3/8 Female
Manufacturer Series
LF3000
Thread Material
Brass
Body Material
Brass
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
+80°C
Finish
Nickel Plated
Maximum Operating Pressure
20 bar
Threaded Connection A
G 3/8 Female
Zemlja podrijetla
France
Detalji o proizvodu
Bulkhead Adaptor - Parallel Thread-to-Tube
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
These fitting connect tubing with a male thread through the installation panel and provide an excellent seal between the panel and fitting.