McLennan Servo Supplies Planetary Gearbox, 10:1 Gear Ratio, 12 Nm Maximum Torque
Tehnička dokumentacija
Tehnički podaci
Gear Ratio
10:1
Gearbox Type
Planetary
Maximum Output Torque
12 Nm
Shaft Diameter
12.69mm
Diameter
57 mm
Overall Length
67.75mm
Zemlja podrijetla
Switzerland
Detalji o proizvodu
Planetary Gearheads Series 57
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 62.182
Each (bez PDV-a)
RSD 74.619
Each (s PDV-om)
1
RSD 62.182
Each (bez PDV-a)
RSD 74.619
Each (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cena |
|---|---|
| 1 - 4 | RSD 62.182 |
| 5+ | RSD 61.137 |
Tehnička dokumentacija
Tehnički podaci
Gear Ratio
10:1
Gearbox Type
Planetary
Maximum Output Torque
12 Nm
Shaft Diameter
12.69mm
Diameter
57 mm
Overall Length
67.75mm
Zemlja podrijetla
Switzerland
Detalji o proizvodu
Planetary Gearheads Series 57
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: