MCP45HV51-502E/ST, Digital Potentiometer 5kΩ 256-Position Linear Serial-I2C 14 Pin, TSSOP
Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipControl Interface
Serial-I2C
Resistance Value
5kΩ
Number of Positions
256
Taper Type
Linear
Memory Type
Volatile
Number of Pots per Package
1
Mounting Type
Surface Mount
Package Type
TSSOP
Pin Count
14
Power Supply Type
Single
Typical Single Supply Voltage
1.8 to 5.5 (Digital) V, 10 to 36 (Analogue) V
Dimensions
5.1 x 4.5 x 1.05mm
Height
1.05mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+125 °C
Length
5.1mm
Width
4.5mm
Detalji o proizvodu
MCP45HVx1 Digital Potentiometers
The MCP45HVx1 family of devices from Microchip are Digital Potentiometers with an SPI Interface and on board Volatile Memory. The device family has dual power rails, one analogue one digital. The Analogue power rail can handle up to +36 V and can be implemented as a dual rail (±18 V) relative to the digital logic ground.
The MCP45HVx1 has a Write Latch (WLAT) function that inhibits the volatile wiper register from being updated (latched) with received data until the WLAT pin is low. This allows the specification of a condition where the volatile wiper register is updated (such as zero crossing).
Digital Potentiometer - Microchip
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 372,309
komadno (u pakovanju od 5) (bez PDV-a)
RSD 446,771
komadno (u pakovanju od 5) (s PDV-om)
5
RSD 372,309
komadno (u pakovanju od 5) (bez PDV-a)
RSD 446,771
komadno (u pakovanju od 5) (s PDV-om)
5
Kupujte na veliko
| količina | Jedinična cena | Po pakovanje |
|---|---|---|
| 5 - 20 | RSD 372,309 | RSD 1.862 |
| 25+ | RSD 365,778 | RSD 1.829 |
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipControl Interface
Serial-I2C
Resistance Value
5kΩ
Number of Positions
256
Taper Type
Linear
Memory Type
Volatile
Number of Pots per Package
1
Mounting Type
Surface Mount
Package Type
TSSOP
Pin Count
14
Power Supply Type
Single
Typical Single Supply Voltage
1.8 to 5.5 (Digital) V, 10 to 36 (Analogue) V
Dimensions
5.1 x 4.5 x 1.05mm
Height
1.05mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+125 °C
Length
5.1mm
Width
4.5mm
Detalji o proizvodu
MCP45HVx1 Digital Potentiometers
The MCP45HVx1 family of devices from Microchip are Digital Potentiometers with an SPI Interface and on board Volatile Memory. The device family has dual power rails, one analogue one digital. The Analogue power rail can handle up to +36 V and can be implemented as a dual rail (±18 V) relative to the digital logic ground.
The MCP45HVx1 has a Write Latch (WLAT) function that inhibits the volatile wiper register from being updated (latched) with received data until the WLAT pin is low. This allows the specification of a condition where the volatile wiper register is updated (such as zero crossing).
Digital Potentiometer - Microchip
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda