Murata 3-Axis Surface Mount Sensor, DFL/SMD, SPI, 12-Pin
Tehnička dokumentacija
Tehnički podaci
Brand
MurataSensor Type
Accelerometer
Number of Axis
3
Technology
Capaitive 3D MEMS
Mounting Type
Surface Mount
Interface Type
SPI
Maximum Frequency Response
88Hz
Minimum Frequency Response
10Hz
Maximum Operating Supply Voltage
3.6 V
Minimum Operating Supply Voltage
3 V
Package Type
DFL/SMD
Sensitivity
1350 LSB/g, 2700 LSB/g, 5400LSB/g
Pin Count
12
Maximum Operating Temperature
+125 °C
Minimum Operating Temperature
-40 °C
Zemlja podrijetla
Finland
Detalji o proizvodu
Accelerometer ICs, Murata
Murata's low-g acceleration sensors include high performance digital and analog accelerometers for both safety critical automotive and industrial applications. Based on 3D MEMS technology and intended for horizontal or vertical measurements. The sensing element and the measuring ASIC are assembled in a dual-in-line or dual-in-flat-line plastic package with pins for surface mount and re-flow soldering.
The zero point temperature dependence is less than 1mg/°C. Environmentally protected with silicone gel for high reliability in a humid environment and during temperature cycling. The sensing element design with over damped frequency response enables excellent performance even in harsh and vibrating environments.
The measuring direction is parallel or perpendicular to the mounting plane. The ASIC includes an on-chip EEPROM memory with the calibration coefficients for unit interchangeability.
Murata accelerometers include failure detection: digitally activated self-test, calibration memory parity or check sum check and continuous connection failure detection.
Accelerometers, Murata
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 4.885,745
komad (u Reel od 100) (bez PDV-a)
RSD 5.862,894
komad (u Reel od 100) (s PDV-om)
100
RSD 4.885,745
komad (u Reel od 100) (bez PDV-a)
RSD 5.862,894
komad (u Reel od 100) (s PDV-om)
100
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Brand
MurataSensor Type
Accelerometer
Number of Axis
3
Technology
Capaitive 3D MEMS
Mounting Type
Surface Mount
Interface Type
SPI
Maximum Frequency Response
88Hz
Minimum Frequency Response
10Hz
Maximum Operating Supply Voltage
3.6 V
Minimum Operating Supply Voltage
3 V
Package Type
DFL/SMD
Sensitivity
1350 LSB/g, 2700 LSB/g, 5400LSB/g
Pin Count
12
Maximum Operating Temperature
+125 °C
Minimum Operating Temperature
-40 °C
Zemlja podrijetla
Finland
Detalji o proizvodu
Accelerometer ICs, Murata
Murata's low-g acceleration sensors include high performance digital and analog accelerometers for both safety critical automotive and industrial applications. Based on 3D MEMS technology and intended for horizontal or vertical measurements. The sensing element and the measuring ASIC are assembled in a dual-in-line or dual-in-flat-line plastic package with pins for surface mount and re-flow soldering.
The zero point temperature dependence is less than 1mg/°C. Environmentally protected with silicone gel for high reliability in a humid environment and during temperature cycling. The sensing element design with over damped frequency response enables excellent performance even in harsh and vibrating environments.
The measuring direction is parallel or perpendicular to the mounting plane. The ASIC includes an on-chip EEPROM memory with the calibration coefficients for unit interchangeability.
Murata accelerometers include failure detection: digitally activated self-test, calibration memory parity or check sum check and continuous connection failure detection.
Accelerometers, Murata
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda