Nuvotem Talema 230V ac, 2 x 12V ac Toroidal Transformer, 15VA 2 Output
Tehnička dokumentacija
Tehnički podaci
Brand
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 12V ac
Power Rating
15VA
Number of Outputs
2
Secondary Current
630mA
Height
31mm
Weight
300g
Diameter
60mm
Dimensions
60 (Dia.) x 31mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Maximum Temperature
+120°C
Minimum Temperature
0°C
Isolation Voltage
4.5kV ac
Detalji o proizvodu
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 5.683
Each (bez PDV-a)
RSD 6.819
Each (s PDV-om)
1
RSD 5.683
Each (bez PDV-a)
RSD 6.819
Each (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cena |
|---|---|
| 1 - 9 | RSD 5.683 |
| 10 - 24 | RSD 5.421 |
| 25 - 49 | RSD 5.029 |
| 50 - 74 | RSD 4.638 |
| 75+ | RSD 4.180 |
Tehnička dokumentacija
Tehnički podaci
Brand
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 12V ac
Power Rating
15VA
Number of Outputs
2
Secondary Current
630mA
Height
31mm
Weight
300g
Diameter
60mm
Dimensions
60 (Dia.) x 31mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Maximum Temperature
+120°C
Minimum Temperature
0°C
Isolation Voltage
4.5kV ac
Detalji o proizvodu
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558