Nuvotem Talema 230V ac, 2 x 15V ac Toroidal Transformer, 30VA 2 Output
Tehnička dokumentacija
Tehnički podaci
Brand
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 15V ac
Power Rating
30VA
Number of Outputs
2
Secondary Current
1A
Height
32mm
Weight
450g
Diameter
70mm
Dimensions
70 (Dia.) x 32mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Minimum Temperature
0°C
Isolation Voltage
4.5kV ac
Maximum Temperature
+120°C
Detalji o proizvodu
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 6.875
Each (bez PDV-a)
RSD 8.250
Each (s PDV-om)
1
RSD 6.875
Each (bez PDV-a)
RSD 8.250
Each (s PDV-om)
1
Kupujte na veliko
| količina | Jedinična cena |
|---|---|
| 1 - 9 | RSD 6.875 |
| 10 - 24 | RSD 6.589 |
| 25 - 49 | RSD 6.141 |
| 50 - 74 | RSD 5.633 |
| 75+ | RSD 5.067 |
Tehnička dokumentacija
Tehnički podaci
Brand
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 15V ac
Power Rating
30VA
Number of Outputs
2
Secondary Current
1A
Height
32mm
Weight
450g
Diameter
70mm
Dimensions
70 (Dia.) x 32mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Minimum Temperature
0°C
Isolation Voltage
4.5kV ac
Maximum Temperature
+120°C
Detalji o proizvodu
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558