Parker PRT series 0.1s to 30s Pneumatic Timer, 8 bar max
Tehnička dokumentacija
Tehnički podaci
Brand
ParkerMaximum Time
30s
Minimum Time
0.1s
Maximum Operating Temperature
+60°C
Manufacturer Series
PRT
Minimum Operating Pressure
3bar
Maximum Operating Pressure
8 bar
Minimum Operating Temperature
-15°C
Detalji o proizvodu
Timer Module
A pneumatic timer consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Logic Systems
Logic units are best thought of as miniature valves, whose purpose is to influence the behaviour of larger power valves. They achieve this by producing and receiving output and input signals, using the common air supply. In this way, they are able to monitor and control a whole sequence of operations with great accuracy and repeatability.
RSD 52.656
RSD 52.656 Each (bez PDV-a)
RSD 63.188
RSD 63.188 Each (s PDV-om)
1
RSD 52.656
RSD 52.656 Each (bez PDV-a)
RSD 63.188
RSD 63.188 Each (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Informacije o stanju skladišta trenutno nisu dostupne.
| količina | Jedinična cena |
|---|---|
| 1 - 4 | RSD 52.656 |
| 5+ | RSD 51.277 |
Tehnička dokumentacija
Tehnički podaci
Brand
ParkerMaximum Time
30s
Minimum Time
0.1s
Maximum Operating Temperature
+60°C
Manufacturer Series
PRT
Minimum Operating Pressure
3bar
Maximum Operating Pressure
8 bar
Minimum Operating Temperature
-15°C
Detalji o proizvodu
Timer Module
A pneumatic timer consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Logic Systems
Logic units are best thought of as miniature valves, whose purpose is to influence the behaviour of larger power valves. They achieve this by producing and receiving output and input signals, using the common air supply. In this way, they are able to monitor and control a whole sequence of operations with great accuracy and repeatability.