Phoenix Contact SUBCON-PLUS 9 Way 35 ° Cable Mount D-sub Connector Socket, with Screw

RS kataloški broj:: 801-9119brend: Phoenix ContactProizvođački broj:: 2708999
brand-logo
Prikaži sve u D Sub Connectors

Tehnička dokumentacija

Tehnički podaci

Number Of Contacts

9

Gender

Female

Body Orientation

35 °

Mounting Type

Cable Mount

D Connector Type

Standard D-Sub

Termination Method

Screw Terminal

Mounting Hardware

Screw

Current Rating

100mA

Housing Material

Metal Plated ABS

Voltage Rating

50.0 V

Length

58

Width

16.6

Depth

39.4

Series

SUBCON-PLUS

Dimensions

(W) 0.65 x (H) 1.5 x (L) 2.2in

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

+75°C

Zemlja podrijetla

Germany

Detalji o proizvodu

Phoenix Contact SUBCON-PLUS-CAN D-Sub Connectors

SUBCON-PLUS-CAN 9 pin D-sub socket connectors designed for use in CAN systems up to 1 MBit/s (CAN, CANopen, SafetyBus-P) allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS-CAN d-sub connectors have a 120 Ohm integrated terminating resistor which can be activated externally by a slide switch, segment by segment startup, a shielded ABS housing, screw connections and can all be used with bus cables as per the CiA Draft Recommendation 303-1 with an outside diameter of 8mm.
Stock numbers 801-9119, and 648-3518 have two 35° angled cable entries and an internal connection unit which can be turned around enabling cable insertion from the left or the right. Stock number 648-3518 has a second d-sub connection for connecting a programming device. These all accept a cable cross section of 7.6mm to 8.4mm.
Stock number 648-3495 has a 35° angled cable entry and can accept a variable cable diameter range of 6 to 10mm.
Stock number 648-3502 has a 180° axial cable entry and two cable entries
For suitable screwdriver see stock number 390-9663

BUS connectors

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Informacije o stanju skladišta trenutno nisu dostupne.

Proverite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

RSD 11.039

Each (bez PDV-a)

RSD 13.246

Each (s PDV-om)

Phoenix Contact SUBCON-PLUS 9 Way 35 ° Cable Mount D-sub Connector Socket, with Screw

RSD 11.039

Each (bez PDV-a)

RSD 13.246

Each (s PDV-om)

Phoenix Contact SUBCON-PLUS 9 Way 35 ° Cable Mount D-sub Connector Socket, with Screw
Informacije o stanju skladišta trenutno nisu dostupne.

Kupujte na veliko

količinaJedinična cena
1 - 9RSD 11.039
10 - 24RSD 9.536
25 - 49RSD 8.753
50+RSD 7.903

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Tehnička dokumentacija

Tehnički podaci

Number Of Contacts

9

Gender

Female

Body Orientation

35 °

Mounting Type

Cable Mount

D Connector Type

Standard D-Sub

Termination Method

Screw Terminal

Mounting Hardware

Screw

Current Rating

100mA

Housing Material

Metal Plated ABS

Voltage Rating

50.0 V

Length

58

Width

16.6

Depth

39.4

Series

SUBCON-PLUS

Dimensions

(W) 0.65 x (H) 1.5 x (L) 2.2in

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

+75°C

Zemlja podrijetla

Germany

Detalji o proizvodu

Phoenix Contact SUBCON-PLUS-CAN D-Sub Connectors

SUBCON-PLUS-CAN 9 pin D-sub socket connectors designed for use in CAN systems up to 1 MBit/s (CAN, CANopen, SafetyBus-P) allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS-CAN d-sub connectors have a 120 Ohm integrated terminating resistor which can be activated externally by a slide switch, segment by segment startup, a shielded ABS housing, screw connections and can all be used with bus cables as per the CiA Draft Recommendation 303-1 with an outside diameter of 8mm.
Stock numbers 801-9119, and 648-3518 have two 35° angled cable entries and an internal connection unit which can be turned around enabling cable insertion from the left or the right. Stock number 648-3518 has a second d-sub connection for connecting a programming device. These all accept a cable cross section of 7.6mm to 8.4mm.
Stock number 648-3495 has a 35° angled cable entry and can accept a variable cable diameter range of 6 to 10mm.
Stock number 648-3502 has a 180° axial cable entry and two cable entries
For suitable screwdriver see stock number 390-9663

BUS connectors

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više