Pilz PSENmag Series Transponder Non-Contact Safety Switch, 24V dc, Plastic Housing, M12
Tehnička dokumentacija
Tehnički podaci
Brand
PilzSupply Voltage
24V dc
Housing Material
Plastic
Connection Type
M12
Actuator Type
Coded
Safety Category
4
Sensor Principle
Transponder
Actuator Included
Yes
Switching Distance
15 mm
Series
PSENmag
IP Rating
IP67
Hazardous Area Certification
ATEX
Number of Approach Directions
5
Depth
40mm
Width
40mm
Length
75mm
Zemlja podrijetla
Switzerland
Detalji o proizvodu
PSENcode Large Non-Contact Safety Switch, Hazardous Area
The PSEN cs1.1p safety switch (stock no. 918-6689) is coded and switches with an actuator from the PSEN cs1.1 series. There is no restriction on the number of times the actuator can be used and reset.
The PSEN cs2.13p safety switch (stock no. 619-2795) is fully coded and switches with an actuator from the PSEN cs2.1 series. These actuators must be taught. It can be taught up to a maximum of 8 times but only 1 actuator at a time is taught.
Supplied with
Actuator
Approvals
CE, cULus Listed, ATEX, TÜV, FCC, IC, ECOLAB.
Standards
EN954-1 (Cat 4), EN60204-1, EN60947-5-3.
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
KM 1.100,92
Each (bez PDV-a)
KM 1.288,08
Each (s PDV-om)
1
KM 1.100,92
Each (bez PDV-a)
KM 1.288,08
Each (s PDV-om)
1
Tehnička dokumentacija
Tehnički podaci
Brand
PilzSupply Voltage
24V dc
Housing Material
Plastic
Connection Type
M12
Actuator Type
Coded
Safety Category
4
Sensor Principle
Transponder
Actuator Included
Yes
Switching Distance
15 mm
Series
PSENmag
IP Rating
IP67
Hazardous Area Certification
ATEX
Number of Approach Directions
5
Depth
40mm
Width
40mm
Length
75mm
Zemlja podrijetla
Switzerland
Detalji o proizvodu
PSENcode Large Non-Contact Safety Switch, Hazardous Area
The PSEN cs1.1p safety switch (stock no. 918-6689) is coded and switches with an actuator from the PSEN cs1.1 series. There is no restriction on the number of times the actuator can be used and reset.
The PSEN cs2.13p safety switch (stock no. 619-2795) is fully coded and switches with an actuator from the PSEN cs2.1 series. These actuators must be taught. It can be taught up to a maximum of 8 times but only 1 actuator at a time is taught.
Supplied with
Actuator
Approvals
CE, cULus Listed, ATEX, TÜV, FCC, IC, ECOLAB.
Standards
EN954-1 (Cat 4), EN60204-1, EN60947-5-3.