Radiall Crimp Extraction Tool, MCX Series, Plug Contact

RS kataloški broj:: 245-5165brend: RadiallProizvođački broj:: R282868000
brand-logo
Prikaži sve u Insertion & Extraction Tools

Tehnička dokumentacija

Tehnički podaci

Brand

Radiall

Contact Type

Plug

Tool Type

Extraction Tool

Series

MCX

Tip Width

7mm

Zemlja podrijetla

France

Detalji o proizvodu

Solder Cap Assembly Tool

An assembly tool for fitting the solder caps into right angle MCX plugs. Fitting instructions: position the cap in the connector body. Slide the assembly tool onto the body grooves of the connector. Turn the tool handle to press fit the cap firmly in. (Use a 7mm A/F wrench if necessary. Do not over torque). This tool is suitable for 50Ω 90º connectors only, not suitable for the 75Ω versions.

Radial MCX Tooling

Informacije o stanju skladišta trenutno nisu dostupne.

Proverite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

RSD 58.460

Each (bez PDV-a)

RSD 70.152

Each (s PDV-om)

Radiall Crimp Extraction Tool, MCX Series, Plug Contact

1

Dostupno u više komada 1
1RSD 58.460
2RSD 116.921
3RSD 175.381
4RSD 233.842
5RSD 292.302
6RSD 350.763
7RSD 409.223
8RSD 467.683
9RSD 526.144
10RSD 584.604
11RSD 643.065
12RSD 701.525
13RSD 759.986
14RSD 818.446
15RSD 876.906

RSD 58.460

Each (bez PDV-a)

RSD 70.152

Each (s PDV-om)

Radiall Crimp Extraction Tool, MCX Series, Plug Contact
Informacije o stanju skladišta trenutno nisu dostupne.

1

Dostupno u više komada 1
1RSD 58.460
2RSD 116.921
3RSD 175.381
4RSD 233.842
5RSD 292.302
6RSD 350.763
7RSD 409.223
8RSD 467.683
9RSD 526.144
10RSD 584.604
11RSD 643.065
12RSD 701.525
13RSD 759.986
14RSD 818.446
15RSD 876.906

Tehnička dokumentacija

Tehnički podaci

Brand

Radiall

Contact Type

Plug

Tool Type

Extraction Tool

Series

MCX

Tip Width

7mm

Zemlja podrijetla

France

Detalji o proizvodu

Solder Cap Assembly Tool

An assembly tool for fitting the solder caps into right angle MCX plugs. Fitting instructions: position the cap in the connector body. Slide the assembly tool onto the body grooves of the connector. Turn the tool handle to press fit the cap firmly in. (Use a 7mm A/F wrench if necessary. Do not over torque). This tool is suitable for 50Ω 90º connectors only, not suitable for the 75Ω versions.

Radial MCX Tooling