Reliance Water Controls Stainless Steel Stopcock, 1/2in

RS kataloški broj:: 794-8426brend: Reliance Water ControlsProizvođački broj:: XVES050900
brand-logo
Prikaži sve u Stopcocks

Tehnička dokumentacija

Tehnički podaci

Connection 1

1/2 in BSP Male

Body Material

Stainless Steel

For Use With

Cold Water, Hot Water

Operating Pressure

5bar

Connection Gender 1

Male

Pipe Size 1

1/2in

Operating Temperature Range

-10 → +99 °C

Zemlja podrijetla

Italy

Detalji o proizvodu

Potable Water Shock Arrestor

Potable water shock arrestors are designed to prevent water hammer. Water hammer is caused by shock waves running through the water system which create noise or in severe cases pipe movement within a system, reverberations are a series of shock waves in quick succession. The pressure wave in such circumstances can be up to three times greater than the standing pressure. Water hammer occurs when the flow rate is suddenly changed.
The solution is to fit a shock arrestor directly before the affected fitting. The shock arrestor is a mini expansion vessel, which works by absorbing the shock wave from the fitting so it does not travel through the system and cause a noise, the closer the shock arrestor is installed to the fitting the better

Approvals

WRAS Approved

Expansion Vessels

Informacije o stanju skladišta trenutno nisu dostupne.

Proverite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

RSD 13.803

Each (bez PDV-a)

RSD 16.563

Each (s PDV-om)

Reliance Water Controls Stainless Steel Stopcock, 1/2in

RSD 13.803

Each (bez PDV-a)

RSD 16.563

Each (s PDV-om)

Reliance Water Controls Stainless Steel Stopcock, 1/2in
Informacije o stanju skladišta trenutno nisu dostupne.

Kupujte na veliko

količinaJedinična cena
1 - 9RSD 13.803
10+RSD 13.441

Tehnička dokumentacija

Tehnički podaci

Connection 1

1/2 in BSP Male

Body Material

Stainless Steel

For Use With

Cold Water, Hot Water

Operating Pressure

5bar

Connection Gender 1

Male

Pipe Size 1

1/2in

Operating Temperature Range

-10 → +99 °C

Zemlja podrijetla

Italy

Detalji o proizvodu

Potable Water Shock Arrestor

Potable water shock arrestors are designed to prevent water hammer. Water hammer is caused by shock waves running through the water system which create noise or in severe cases pipe movement within a system, reverberations are a series of shock waves in quick succession. The pressure wave in such circumstances can be up to three times greater than the standing pressure. Water hammer occurs when the flow rate is suddenly changed.
The solution is to fit a shock arrestor directly before the affected fitting. The shock arrestor is a mini expansion vessel, which works by absorbing the shock wave from the fitting so it does not travel through the system and cause a noise, the closer the shock arrestor is installed to the fitting the better

Approvals

WRAS Approved

Expansion Vessels