RS PRO Self-Adhesive Thermal Interface Sheet, 0.16mm Thick, 10W/m·K, Graphite, 150 x 150mm
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProDimensions
150 x 150mm
Thickness
0.16mm
Length
150mm
Width
150mm
Thermal Conductivity
10W/m·K
Material
Graphite
Self-Adhesive
Yes
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+150°C
Hardness
Shore A 80
Colour
Black
Operating Temperature Range
-50 → +150 °C
Distrelec Product Id
30403526
Detalji o proizvodu
RS PRO Graphite Thermal Interface Material
RS PRO range of thermally conductive graphite interface material heat pads which are available in plain, 1 sided adhesive and PET coated. Thermal gap pads provide a thermal interface between heatsinks (devices or substances for absorbing unwanted or excess heat) and electronic devices. They’re particularly useful where air gaps, rough surface textures or uneven surface topography prevent the use of traditional grease or paste.
RSD 2.977
RSD 2.977 Each (bez PDV-a)
RSD 3.573
RSD 3.573 Each (s PDV-om)
1
RSD 2.977
RSD 2.977 Each (bez PDV-a)
RSD 3.573
RSD 3.573 Each (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Informacije o stanju skladišta trenutno nisu dostupne.
| količina | Jedinična cena |
|---|---|
| 1 - 9 | RSD 2.977 |
| 10 - 24 | RSD 2.779 |
| 25+ | RSD 2.771 |
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProDimensions
150 x 150mm
Thickness
0.16mm
Length
150mm
Width
150mm
Thermal Conductivity
10W/m·K
Material
Graphite
Self-Adhesive
Yes
Minimum Operating Temperature
-50°C
Maximum Operating Temperature
+150°C
Hardness
Shore A 80
Colour
Black
Operating Temperature Range
-50 → +150 °C
Distrelec Product Id
30403526
Detalji o proizvodu
RS PRO Graphite Thermal Interface Material
RS PRO range of thermally conductive graphite interface material heat pads which are available in plain, 1 sided adhesive and PET coated. Thermal gap pads provide a thermal interface between heatsinks (devices or substances for absorbing unwanted or excess heat) and electronic devices. They’re particularly useful where air gaps, rough surface textures or uneven surface topography prevent the use of traditional grease or paste.