RS PRO Test Pin 1.5A
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProCurrent Rating
1.5A
Probe Socket Diameter
16.35mm
Distrelec Product Id
30403169
Zemlja podrijetla
China
Detalji o proizvodu
RS Pro Spring Probe with Needle Point Head
Brought to you under the trusted RS Pro Brand, this flat head spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The needle head is ideal for test lands, pads, leads and holes. Penetrates oxides and fluxes as well as contaminated boards.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 3.756
RSD 751,151 komadno (u pakovanju od 5) (bez PDV-a)
RSD 4.507
RSD 901,381 komadno (u pakovanju od 5) (s PDV-om)
5
RSD 3.756
RSD 751,151 komadno (u pakovanju od 5) (bez PDV-a)
RSD 4.507
RSD 901,381 komadno (u pakovanju od 5) (s PDV-om)
5
Kupujte na veliko
| količina | Jedinična cena | Po pakovanje |
|---|---|---|
| 5 - 20 | RSD 751,151 | RSD 3.756 |
| 25 - 45 | RSD 704,122 | RSD 3.521 |
| 50 - 95 | RSD 674,076 | RSD 3.370 |
| 100+ | RSD 640,111 | RSD 3.201 |
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProCurrent Rating
1.5A
Probe Socket Diameter
16.35mm
Distrelec Product Id
30403169
Zemlja podrijetla
China
Detalji o proizvodu
RS Pro Spring Probe with Needle Point Head
Brought to you under the trusted RS Pro Brand, this flat head spring spade terminal probe is designed to be used with an appropriate receptacle, which is ordered separately. Having the probe separate from the receptacle allows easy replacement of damaged spring test probes without disturbing the wiring.
The probe is suited ideally (in development and production) for automatic test equipment (ATE) and test jigs, where fast testing of multipoint PCBs and sub-assemblies is required. Receptacles can be push fitted into the mounting plate to provide an airtight seal without the use of adhesives.
The needle head is ideal for test lands, pads, leads and holes. Penetrates oxides and fluxes as well as contaminated boards.