RS PRO Thermal Interface Pad, 0.127mm Thick, 2.5W/m·K, 16 x 16.5mm
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProDimensions
16 x 16.5mm
Thickness
0.127mm
Length
16mm
Width
16.5mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Minimum Operating Temperature
-45°C
Maximum Operating Temperature
+125°C
Colour
Grey
Operating Temperature Range
-45 → +125 °C
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 116,265
komadno (u pakovanju od 10) (bez PDV-a)
RSD 139,518
komadno (u pakovanju od 10) (s PDV-om)
10
RSD 116,265
komadno (u pakovanju od 10) (bez PDV-a)
RSD 139,518
komadno (u pakovanju od 10) (s PDV-om)
10
Kupujte na veliko
| količina | Jedinična cena | Po pakovanje |
|---|---|---|
| 10 - 90 | RSD 116,265 | RSD 1.163 |
| 100 - 240 | RSD 108,427 | RSD 1.084 |
| 250 - 490 | RSD 104,508 | RSD 1.045 |
| 500+ | RSD 100,589 | RSD 1.006 |
Tehnička dokumentacija
Tehnički podaci
Brand
RS ProDimensions
16 x 16.5mm
Thickness
0.127mm
Length
16mm
Width
16.5mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Minimum Operating Temperature
-45°C
Maximum Operating Temperature
+125°C
Colour
Grey
Operating Temperature Range
-45 → +125 °C
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.