SKF Hand Bearing Puller, 200.0 cm³ Capacity, 400.0MPa Force

RS kataloški broj:: 885-5322brend: SKFProizvođački broj:: THAP 400E/K10
brand-logo
Prikaži sve u Bearing Pullers

Tehnička dokumentacija

Tehnički podaci

Brand

SKF

Puller Type

Bearing Puller

Capacity

200.0 cm³

Hydraulic Force

400.0MPa

Operation

Hand

Zemlja podrijetla

Netherlands

Detalji o proizvodu

SKF Oil Injection Kit - 729101 Series

SKF's oil injection kits provide a safe, efficient and easy way to remove or install bearings on shafts. Suitable for interference fit bearings on both tapered and cylindrical shafts. Oil is injected into oilways machined into the shaft during manufacture. The oil creates a layer between the bearing and shaft that significantly reduces the amount of force required fit or remove the bearing to the shaft. Suitable for use with propellers, rolling bearings, couplings, gears, pulleys and flywheels where the surface pressure is less than 250 N/mm2 (8211251) or 350 N/mm2 (8211255).

Oil Injection Kits

Informacije o stanju skladišta trenutno nisu dostupne.

Proverite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

P.O.A.

SKF Hand Bearing Puller, 200.0 cm³ Capacity, 400.0MPa Force

1

Dostupno u više komada 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

SKF Hand Bearing Puller, 200.0 cm³ Capacity, 400.0MPa Force
Informacije o stanju skladišta trenutno nisu dostupne.

1

Dostupno u više komada 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Tehnička dokumentacija

Tehnički podaci

Brand

SKF

Puller Type

Bearing Puller

Capacity

200.0 cm³

Hydraulic Force

400.0MPa

Operation

Hand

Zemlja podrijetla

Netherlands

Detalji o proizvodu

SKF Oil Injection Kit - 729101 Series

SKF's oil injection kits provide a safe, efficient and easy way to remove or install bearings on shafts. Suitable for interference fit bearings on both tapered and cylindrical shafts. Oil is injected into oilways machined into the shaft during manufacture. The oil creates a layer between the bearing and shaft that significantly reduces the amount of force required fit or remove the bearing to the shaft. Suitable for use with propellers, rolling bearings, couplings, gears, pulleys and flywheels where the surface pressure is less than 250 N/mm2 (8211251) or 350 N/mm2 (8211255).

Oil Injection Kits