STMicroelectronics Battery Charger, Energy Harvesting for SPV1050

RS kataloški broj:: 875-0898brend: STMicroelectronicsProizvođački broj:: STEVAL-ISV019V1
brand-logo

Tehnička dokumentacija

Tehnički podaci

Power Management Function

Battery Charger, Energy Harvesting

Kit Classification

Evaluation Board

Featured Device

SPV1050

Detalji o proizvodu

SPV1050 ULP Energy Harvester and Battery Charger Evaluation Board, STMicroelectronics

The STEVAL-ISV019V1 is an Evaluation Board based on the SPV1050, an Ultra Low Power (ULP) energy harvester and battery charger with embedded MPPT and LDO (Low Dropout) Regulators.
The evaluation board is working at the best efficiency implementing the MPPT (Maximum Power Point Tracking) DC-DC converter configuration.
It is optimized to harvest energy from Photovoltaic (PV) panels supplying 0.5V to 2.5V and 30μA to 20mA. You can charge a battery with 3.7V under-voltage protection threshold and 4.2V end of charge voltage threshold. Operating flexibility is possible for a different PV panel and battery with a few easy board changes on the application components.

Battery Charging & Monitoring, STMicroelectronics

Informacije o stanju skladišta trenutno nisu dostupne.

Proverite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

RSD 9.984

RSD 9.984 Each (bez PDV-a)

RSD 11.981

RSD 11.981 Each (s PDV-om)

STMicroelectronics Battery Charger, Energy Harvesting for SPV1050

RSD 9.984

RSD 9.984 Each (bez PDV-a)

RSD 11.981

RSD 11.981 Each (s PDV-om)

STMicroelectronics Battery Charger, Energy Harvesting for SPV1050
Informacije o stanju skladišta trenutno nisu dostupne.

Tehnička dokumentacija

Tehnički podaci

Power Management Function

Battery Charger, Energy Harvesting

Kit Classification

Evaluation Board

Featured Device

SPV1050

Detalji o proizvodu

SPV1050 ULP Energy Harvester and Battery Charger Evaluation Board, STMicroelectronics

The STEVAL-ISV019V1 is an Evaluation Board based on the SPV1050, an Ultra Low Power (ULP) energy harvester and battery charger with embedded MPPT and LDO (Low Dropout) Regulators.
The evaluation board is working at the best efficiency implementing the MPPT (Maximum Power Point Tracking) DC-DC converter configuration.
It is optimized to harvest energy from Photovoltaic (PV) panels supplying 0.5V to 2.5V and 30μA to 20mA. You can charge a battery with 3.7V under-voltage protection threshold and 4.2V end of charge voltage threshold. Operating flexibility is possible for a different PV panel and battery with a few easy board changes on the application components.

Battery Charging & Monitoring, STMicroelectronics