TE Connectivity Straight, Fluid Resistant Elastomer, 25mm

RS kataloški broj:: 718-3313Pbrend: TE ConnectivityProizvođački broj:: 202K232-25-0
brand-logo
Prikaži sve u Heat Shrink Boots

Tehnička dokumentacija

Tehnički podaci

Brand

TE Connectivity

Type

Straight

Inside Diameter Primary

25mm

Inside Diameter (Primary)

25mm

Inside Diameter Secondary

8mm

Inside Diameter (Secondary)

8mm

Adhesive Lined

No

Material

Fluid Resistant Elastomer

Number of Breakouts

1

Minimum Operating Temperature

-75°C

Maximum Operating Temperature

+150°C

Shrunk Diameter Primary

13.8mm

Shrunk Diameter (Primary)

13.8mm

Shrunk Diameter Secondary

3.3mm

Shrunk Diameter (Secondary)

3.3mm

Series

202K2

Detalji o proizvodu

General Purpose (Lipped) - 202K1 and 222K1 Series

Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.

Informacije o stanju skladišta trenutno nisu dostupne.

RSD 55.846

RSD 3.723 komad (isporučivo u vrećici) (bez PDV-a)

RSD 67.016

RSD 4.468 komad (isporučivo u vrećici) (s PDV-om)

TE Connectivity Straight, Fluid Resistant Elastomer, 25mm
Odaberite vrstu pakovanja

Proizvodno pakovanje (kesa)

Odaberite vrstu pakovanja

Standard - each

Dostupno u više komada 1.

Proizvodnja -

Dostupno u više komada 1.

Preporuča se za narudžbu u velikim količinama. Predmeti su pakirani spremni za umetanje u mašine, omogućujući vam da poboljšate učinkovitost proizvodnje.

15

Dostupno u više komada 1
15RSD 55.846
16RSD 59.570
17RSD 63.293
18RSD 67.016
19RSD 70.739
20RSD 74.462
21RSD 78.185
22RSD 81.908
23RSD 85.631
24RSD 89.354
25RSD 93.077
26RSD 96.800
27RSD 100.524
28RSD 104.247
29RSD 107.970

RSD 55.846

RSD 3.723 komad (isporučivo u vrećici) (bez PDV-a)

RSD 67.016

RSD 4.468 komad (isporučivo u vrećici) (s PDV-om)

TE Connectivity Straight, Fluid Resistant Elastomer, 25mm
Informacije o stanju skladišta trenutno nisu dostupne.
Odaberite vrstu pakovanja

Proizvodno pakovanje (kesa)

Odaberite vrstu pakovanja

Standard - each

Dostupno u više komada 1.

Proizvodnja -

Dostupno u više komada 1.

Preporuča se za narudžbu u velikim količinama. Predmeti su pakirani spremni za umetanje u mašine, omogućujući vam da poboljšate učinkovitost proizvodnje.

15

Dostupno u više komada 1
15RSD 55.846
16RSD 59.570
17RSD 63.293
18RSD 67.016
19RSD 70.739
20RSD 74.462
21RSD 78.185
22RSD 81.908
23RSD 85.631
24RSD 89.354
25RSD 93.077
26RSD 96.800
27RSD 100.524
28RSD 104.247
29RSD 107.970

Informacije o stanju skladišta trenutno nisu dostupne.

Proverite ponovno kasnije.

Tehnička dokumentacija

Tehnički podaci

Brand

TE Connectivity

Type

Straight

Inside Diameter Primary

25mm

Inside Diameter (Primary)

25mm

Inside Diameter Secondary

8mm

Inside Diameter (Secondary)

8mm

Adhesive Lined

No

Material

Fluid Resistant Elastomer

Number of Breakouts

1

Minimum Operating Temperature

-75°C

Maximum Operating Temperature

+150°C

Shrunk Diameter Primary

13.8mm

Shrunk Diameter (Primary)

13.8mm

Shrunk Diameter Secondary

3.3mm

Shrunk Diameter (Secondary)

3.3mm

Series

202K2

Detalji o proizvodu

General Purpose (Lipped) - 202K1 and 222K1 Series

Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.