TE Connectivity Transparent Polyolefin Solder Sleeve 16mm Length 1.1 → 2.9mm Cable Diameter

RS kataloški broj:: 542-5757brend: TE ConnectivityProizvođački broj:: B-155-1502
brand-logo
Prikaži sve u Solder Sleeves

Tehnička dokumentacija

Tehnički podaci

Minimum Cable Diameter

1.1mm

Maximum Cable Diameter

2.9mm

Sleeve Length

16mm

Material

Polyolefin

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+125°C

Colour

Transparent

Series

B-155

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Zemlja podrijetla

Mexico

Detalji o proizvodu

Wire Termination: Pin, Post & Tab

Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several pins to be terminated it is possible to position and recover an entire row of solder sleeves in one go.,Recommended for use with most connector pins/posts/tabs applications such as LED's, switches, multiple row/pin connectors.

Informacije o stanju skladišta trenutno nisu dostupne.

Proverite ponovno kasnije.

Informacije o stanju skladišta trenutno nisu dostupne.

RSD 71.849

1 Box of 500 (bez PDV-a)

RSD 86.219

1 Box of 500 (s PDV-om)

TE Connectivity Transparent Polyolefin Solder Sleeve 16mm Length 1.1 → 2.9mm Cable Diameter

RSD 71.849

1 Box of 500 (bez PDV-a)

RSD 86.219

1 Box of 500 (s PDV-om)

TE Connectivity Transparent Polyolefin Solder Sleeve 16mm Length 1.1 → 2.9mm Cable Diameter
Informacije o stanju skladišta trenutno nisu dostupne.

Kupujte na veliko

količinaJedinična cena
1 - 14RSD 71.849
15 - 49RSD 69.236
50+RSD 68.322

Tehnička dokumentacija

Tehnički podaci

Minimum Cable Diameter

1.1mm

Maximum Cable Diameter

2.9mm

Sleeve Length

16mm

Material

Polyolefin

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+125°C

Colour

Transparent

Series

B-155

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Zemlja podrijetla

Mexico

Detalji o proizvodu

Wire Termination: Pin, Post & Tab

Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several pins to be terminated it is possible to position and recover an entire row of solder sleeves in one go.,Recommended for use with most connector pins/posts/tabs applications such as LED's, switches, multiple row/pin connectors.