Tehnička dokumentacija
Tehnički podaci
Brand
Texas InstrumentsComparator Type
General Purpose
Mounting Type
Through Hole
Package Type
PDIP
Power Supply Type
Dual, Single
Output Type
Open Collector/Emitter
Number of Channels per Chip
1
Typical Response Time
0.165µs
Pin Count
8
Typical Single Supply Voltage
5 → 28 V
Dimensions
9.81 x 6.35 x 4.57mm
Length
9.81mm
Width
6.35mm
Height
4.57mm
Typical Dual Supply Voltage
±12 V, ±3 V, ±5 V, ±9 V
Minimum Operating Temperature
-40 °C
Typical Voltage Gain
106.02 dB
Maximum Operating Temperature
+85 °C
Detalji o proizvodu
LMx11 family Single Comparators
The LM111, LM211 and LM311 from Texas Instruments are differential input voltage comparators with a wide operating voltage range and 200 ns response time. The inputs of these devices can be isolated from system ground and the uncommitted outputs can drive loads referred to either supply rail or ground. These single comparators are provided with balancing and strobe capability.
Comparators, Texas Instruments
Texas Instruments range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
RSD 147,617
komadno (u pakovanju od 20) (bez PDV-a)
RSD 177,14
komadno (u pakovanju od 20) (s PDV-om)
20
RSD 147,617
komadno (u pakovanju od 20) (bez PDV-a)
RSD 177,14
komadno (u pakovanju od 20) (s PDV-om)
20
Kupujte na veliko
količina | Jedinična cena | Po pakovanje |
---|---|---|
20 - 80 | RSD 147,617 | RSD 2.952 |
100 - 180 | RSD 142,392 | RSD 2.848 |
200 - 480 | RSD 133,248 | RSD 2.665 |
500 - 980 | RSD 124,103 | RSD 2.482 |
1000+ | RSD 122,797 | RSD 2.456 |
Tehnička dokumentacija
Tehnički podaci
Brand
Texas InstrumentsComparator Type
General Purpose
Mounting Type
Through Hole
Package Type
PDIP
Power Supply Type
Dual, Single
Output Type
Open Collector/Emitter
Number of Channels per Chip
1
Typical Response Time
0.165µs
Pin Count
8
Typical Single Supply Voltage
5 → 28 V
Dimensions
9.81 x 6.35 x 4.57mm
Length
9.81mm
Width
6.35mm
Height
4.57mm
Typical Dual Supply Voltage
±12 V, ±3 V, ±5 V, ±9 V
Minimum Operating Temperature
-40 °C
Typical Voltage Gain
106.02 dB
Maximum Operating Temperature
+85 °C
Detalji o proizvodu
LMx11 family Single Comparators
The LM111, LM211 and LM311 from Texas Instruments are differential input voltage comparators with a wide operating voltage range and 200 ns response time. The inputs of these devices can be isolated from system ground and the uncommitted outputs can drive loads referred to either supply rail or ground. These single comparators are provided with balancing and strobe capability.
Comparators, Texas Instruments
Texas Instruments range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.