Tehnička dokumentacija
Tehnički podaci
Number of Rows
1
Bore Type
Parallel
End Type
Open
Roller Bearing Type
Needle
Fatigue Limit Load
3.15kN
Cage Material
Sheet Steel
Maximum Speed - Grease
9000rpm
Maximum Speed - Oil
14000rpm
Reference Speed
12000rpm
Limiting Speed
14000rpm
Race Width
20mm
Material
Metal
Static Load Rating
26.5kN
Outside Diameter
26mm
Dynamic Load Rating
15.1kN
Inside Diameter
20mm
Brand
SKFZemlja podrijetla
Germany
Detalji o proizvodu
JST ACH Series 1.2 mm Wire to Board PCB Header Connectors
ACH series wire to board PCB header connectors with a 1.2mm pitch. These ACH 1.2 mm wire to board PCB headers have compact, space saving, low profile design with a height 1.4 mm and width of 4.3 mm. These 1.2 mm ACH wire-to-board headers are mated from the vertical direction, while the wires come out in a horizontal direction. The ultra compact, low-profile design of these ACH header connectors provides the flexibility for applications that need high performance connectors in tight spaces.
1.20mm Wire to Board JST ACH Series
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
€ 11,50
Each (bez PDV-a)
€ 13,46
Each (s PDV-om)
1
€ 11,50
Each (bez PDV-a)
€ 13,46
Each (s PDV-om)
1
Kupujte na veliko
količina | Jedinična cijena |
---|---|
1 - 4 | € 11,50 |
5+ | € 11,25 |
Tehnička dokumentacija
Tehnički podaci
Number of Rows
1
Bore Type
Parallel
End Type
Open
Roller Bearing Type
Needle
Fatigue Limit Load
3.15kN
Cage Material
Sheet Steel
Maximum Speed - Grease
9000rpm
Maximum Speed - Oil
14000rpm
Reference Speed
12000rpm
Limiting Speed
14000rpm
Race Width
20mm
Material
Metal
Static Load Rating
26.5kN
Outside Diameter
26mm
Dynamic Load Rating
15.1kN
Inside Diameter
20mm
Brand
SKFZemlja podrijetla
Germany
Detalji o proizvodu
JST ACH Series 1.2 mm Wire to Board PCB Header Connectors
ACH series wire to board PCB header connectors with a 1.2mm pitch. These ACH 1.2 mm wire to board PCB headers have compact, space saving, low profile design with a height 1.4 mm and width of 4.3 mm. These 1.2 mm ACH wire-to-board headers are mated from the vertical direction, while the wires come out in a horizontal direction. The ultra compact, low-profile design of these ACH header connectors provides the flexibility for applications that need high performance connectors in tight spaces.