Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipMaximum Switching Frequency
1.6 MHz
Output Voltage
0.5 → 3.6 V
Output Current
30 mA
Control Method
Voltage
Mounting Type
Surface Mount
Fall Time
30ns
Package Type
QFN
Rise Time
30ns
Pin Count
24
Topology
Buck
Maximum Duty Cycle
<50%
Dimensions
4 x 4 x 0.85mm
Length
4mm
Width
4mm
Height
0.85mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+125 °C
Detalji o proizvodu
MCP19118/19119 PWM Controllers with 8-Bit PIC MCU
MCP19118/19119 devices from Microchip are highly integrated, mixed signal, analogue pulse-width modulation (PWM) current mode controllers with an integrated PIC® microcontroller core for synchronous DC/DC step-down applications.
The integrated PIC® microcontroller mid-range core allows complete customisation of the device operating parameters, start-up and shutdown profiles, protection levels and fault handling procedures. After initial configuration using Microchips MPLAB® X Integrated Development Environment (IDE) software, the PMBus or I2C can be used by a host PC to communicate with or modify the operation of the device.
PWM (Pulse Width Modulation) Controllers, Microchip
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
P.O.A.
2
P.O.A.
2
Tehnička dokumentacija
Tehnički podaci
Brand
MicrochipMaximum Switching Frequency
1.6 MHz
Output Voltage
0.5 → 3.6 V
Output Current
30 mA
Control Method
Voltage
Mounting Type
Surface Mount
Fall Time
30ns
Package Type
QFN
Rise Time
30ns
Pin Count
24
Topology
Buck
Maximum Duty Cycle
<50%
Dimensions
4 x 4 x 0.85mm
Length
4mm
Width
4mm
Height
0.85mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+125 °C
Detalji o proizvodu
MCP19118/19119 PWM Controllers with 8-Bit PIC MCU
MCP19118/19119 devices from Microchip are highly integrated, mixed signal, analogue pulse-width modulation (PWM) current mode controllers with an integrated PIC® microcontroller core for synchronous DC/DC step-down applications.
The integrated PIC® microcontroller mid-range core allows complete customisation of the device operating parameters, start-up and shutdown profiles, protection levels and fault handling procedures. After initial configuration using Microchips MPLAB® X Integrated Development Environment (IDE) software, the PMBus or I2C can be used by a host PC to communicate with or modify the operation of the device.