Figaro NGM2611-E13 Methane for Residential Natural Gas Alarm
Tehnička dokumentacija
Tehnički podaci
Proizvođač
FigaroGases Detected
Methane
Application
Residential Natural Gas Alarm
Sub Type
Gas Sensor
Minimum Supply Voltage
0.3V
Maximum Supply Voltage
5.5V
Power Source
DC Power Supply
Pin Count
5
Minimum Operating Temperature
0°C
Package Type
Module
Maximum Operating Temperature
40°C
Width
12.5 mm
Length
27mm
Height
11mm
Standards/Approvals
RoHS, EN50194, UL1484
Series
NGM2611
Weight
2.8g
Automotive Standard
No
Detalji o proizvodu
NGM2611-E13 Methane Gas Sensor Module
The NGM2611 from Figaro is a pre-calibrated sensor module for natural gas alarms which has been accurately calibrated in Figaro’s temperature and humidity controlled facility. The module uses the TGS2611-E00 gas sensor which incorporates a filter to reduce the influence of interference gases such as alcohol, resulting in highly selective response to methane. The module is designed to meet the performance requirements of EN50194 and UL1484.
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
€ 38,36
€ 38,36 komadno (bez PDV-a)
€ 47,95
€ 47,95 komadno (s PDV-om)
1
€ 38,36
€ 38,36 komadno (bez PDV-a)
€ 47,95
€ 47,95 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Proizvođač
FigaroGases Detected
Methane
Application
Residential Natural Gas Alarm
Sub Type
Gas Sensor
Minimum Supply Voltage
0.3V
Maximum Supply Voltage
5.5V
Power Source
DC Power Supply
Pin Count
5
Minimum Operating Temperature
0°C
Package Type
Module
Maximum Operating Temperature
40°C
Width
12.5 mm
Length
27mm
Height
11mm
Standards/Approvals
RoHS, EN50194, UL1484
Series
NGM2611
Weight
2.8g
Automotive Standard
No
Detalji o proizvodu
NGM2611-E13 Methane Gas Sensor Module
The NGM2611 from Figaro is a pre-calibrated sensor module for natural gas alarms which has been accurately calibrated in Figaro’s temperature and humidity controlled facility. The module uses the TGS2611-E00 gas sensor which incorporates a filter to reduce the influence of interference gases such as alcohol, resulting in highly selective response to methane. The module is designed to meet the performance requirements of EN50194 and UL1484.
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda