Murata MGK Non-Isolated DC-DC Converter, 4.5 → 5.5 V dc Input, Surface Mount, +85°C Max Temp -40°C Min Temp
Tehnička dokumentacija
Tehnički podaci
Proizvođač
MurataInput Voltage Range
4.5 → 5.5 V dc
Input Voltage Nominal
5 V dc
Mounting Type
Surface Mount
Number of Outputs
1
Series
MGK
Minimum Temperature
-40°C
Efficiency
90%
Maximum Temperature
+85°C
Standards Met
CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
PRICED TO CLEAR
Yes
Detalji o proizvodu
Murata Mono Block 6A DC-DC Converter
The MYMGK***06 series are miniature Mono Block type non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measures only 9.0 x 7.5 x 5.0 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems. The converters have input voltage ranges of 4.5 to 5.5 V dc（*FRSR) or 8.0 to 14 V dc（*ERSR) and a maximum output current of 6 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high power conversion efficient PoL module features programmable output voltage 0.7to1.8 V dc（*FRSR) or 0.7 to 5.0 V dc（*ERSR), On/Off control and Power Good signal output. These converters also include under voltage lock out (UVLO), output short circuit protection and over-current protection.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
Provjerite ponovno kasnije.
P.O.A.
1
P.O.A.
1
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Proizvođač
MurataInput Voltage Range
4.5 → 5.5 V dc
Input Voltage Nominal
5 V dc
Mounting Type
Surface Mount
Number of Outputs
1
Series
MGK
Minimum Temperature
-40°C
Efficiency
90%
Maximum Temperature
+85°C
Standards Met
CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
PRICED TO CLEAR
Yes
Detalji o proizvodu
Murata Mono Block 6A DC-DC Converter
The MYMGK***06 series are miniature Mono Block type non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measures only 9.0 x 7.5 x 5.0 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems. The converters have input voltage ranges of 4.5 to 5.5 V dc（*FRSR) or 8.0 to 14 V dc（*ERSR) and a maximum output current of 6 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high power conversion efficient PoL module features programmable output voltage 0.7to1.8 V dc（*FRSR) or 0.7 to 5.0 V dc（*ERSR), On/Off control and Power Good signal output. These converters also include under voltage lock out (UVLO), output short circuit protection and over-current protection.
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda