Tehnička dokumentacija
Tehnički podaci
Brand
MurataOutput Voltage
1.8V dc
Input Voltage Range
4.5 → 5.5 V dc
Power Rating
36W
Input Voltage Nominal
5 V dc
Output Current
20A
Mounting Type
Surface Mount
Number of Outputs
1
Width
9mm
Depth
5.6mm
Length
10.5mm
Series
MGK
Load Regulation
±1%
Minimum Temperature
-40°C
Efficiency
89.2%
Maximum Temperature
+85°C
Standards Met
CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
Detalji o proizvodu
Murata Mono Block 20A DC-DC Converter
The MYMGK1R820 series from Murata are miniature Mono Block type Non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measure only 10.5 x 9.0 x 5.6 mm. Applications include powering FPGA/CPUs, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems.
The converters have input voltage ranges of 4.5 V dc to 5.5 V dc (*FRSR) or 8.0 V dc to 14 V dc (*ERSR) and a maximum output current of 20 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high-power conversion efficient PoL module features programmable output voltage 0.7 V to 1.8 V, On/Off control and Power Good signal output. These converters also include under voltage lock out UVLO), output short circuit protection and overcurrent protection.
Informacije o stanju skladišta trenutno nisu dostupne.
Proverite ponovno kasnije.
P.O.A.
1
P.O.A.
1
Tehnička dokumentacija
Tehnički podaci
Brand
MurataOutput Voltage
1.8V dc
Input Voltage Range
4.5 → 5.5 V dc
Power Rating
36W
Input Voltage Nominal
5 V dc
Output Current
20A
Mounting Type
Surface Mount
Number of Outputs
1
Width
9mm
Depth
5.6mm
Length
10.5mm
Series
MGK
Load Regulation
±1%
Minimum Temperature
-40°C
Efficiency
89.2%
Maximum Temperature
+85°C
Standards Met
CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
Detalji o proizvodu
Murata Mono Block 20A DC-DC Converter
The MYMGK1R820 series from Murata are miniature Mono Block type Non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measure only 10.5 x 9.0 x 5.6 mm. Applications include powering FPGA/CPUs, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems.
The converters have input voltage ranges of 4.5 V dc to 5.5 V dc (*FRSR) or 8.0 V dc to 14 V dc (*ERSR) and a maximum output current of 20 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high-power conversion efficient PoL module features programmable output voltage 0.7 V to 1.8 V, On/Off control and Power Good signal output. These converters also include under voltage lock out UVLO), output short circuit protection and overcurrent protection.