Tehnička dokumentacija
Tehnički podaci
Proizvođač
DigilentAccessory Type
Programming Module
Product Type
Development Kit Accessory
For Use With
FPGA Devices
Standards/Approvals
No
Detalji o proizvodu
The JTAG-SMT2 surface-mount programming module allows high-speed programming of Xilinx FPGA devices from a host PC. Users can solder the module directly onto a target board like any other component. Note: The JTAG-SMT2-NC part (RS 134-6473) does not have a USB connector fitted.
An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.
This module is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 59,10
€ 59,10 komadno (bez PDV-a)
€ 73,88
€ 73,88 komadno (s PDV-om)
1
€ 59,10
€ 59,10 komadno (bez PDV-a)
€ 73,88
€ 73,88 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
| količina | jedinična cijena |
|---|---|
| 1 - 4 | € 59,10 |
| 5+ | € 56,95 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
DigilentAccessory Type
Programming Module
Product Type
Development Kit Accessory
For Use With
FPGA Devices
Standards/Approvals
No
Detalji o proizvodu
The JTAG-SMT2 surface-mount programming module allows high-speed programming of Xilinx FPGA devices from a host PC. Users can solder the module directly onto a target board like any other component. Note: The JTAG-SMT2-NC part (RS 134-6473) does not have a USB connector fitted.
An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.
This module is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.
