Aim-TTi 1908P Bench Digital Multimeter True RMS, 10 A Max, 10 A Max
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Aim-TTiProduct Type
Multimeter
Multimeter Type
Bench
Model Number
1908P
Resistance Resolution
1mΩ
Display Type
Digital
Functions Measured
Temperature, DC Voltage, AC Voltage, Capacitance, DC Current, Frequency, Resistance, AC Current
Maximum DC Voltage Measurement
1000V
Maximum DC Current Measurement
10A
Maximum Resistance Measurement
1kΩ
Maximum AC Current Measurement
10A
True RMS
Yes
DC Current Accuracy
0.05 %
AC Voltage Accuracy
0.3 %
AC Current Accuracy
0.35 %
DC Voltage Accuracy
0.02 %
DC Current Resolution
100nA dc
AC Current Resolution
100nA
DC Voltage Resolution
1 μV
Maximum Frequency
100kHz
Minimum Operating Temperature
5°C
Resistance Measurement Accuracy
±0.05 %
Maximum Operating Temperature
40°C
Length
260mm
Width
235 mm
Height
88mm
Weight
2kg
Standards/Approvals
No
Safety Category Level
CAT II
Battery Type
Rechargeable Ni-MH
Safety Category Voltage
600V
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
Aim-TTI 1908P Series Dual Measurement Bench Multimeter
Aim-TTi 1908 Series is a dual measurement, dual display bench-top/portable multimeter. It features continuity and diode test, automatic or manual ranging, linear scaling with offset, dB measurements, limits comparison, percentage deviation (%), min-max storage, power measurement in watts or VA, automatic data logging and external triggering. The logger function can store up to 500 readings from the main display in non-volatile memory. The two displays can be used to display a measurement along with the selected range (e.g. 100 Vdc), a measurement in two different units (e.g. AC volts and dBm), the result of a calculated function (e.g. value and % deviation), two parameters of one signal (e.g. AC and DC volts) or two different signals (e.g. AC volts and DC current). Software 1908-PC Link provides remote control of main functions and logging function with graphical and tabular displays (logged data can be exported to a CSV file). Model 1908P can be remotely controlled via its RS232, USB or LAN interface. Model 1908 (non ’P’) can only be controlled via USB.
For an optional GPIB module see stock number 144-5481.
Supplied with
IVI driver, LV/CVI driver, USB driver
Standards
EN61010-1, EN61010-2-030 & EN61010-2-033, EN61326-1 EMC
Informacije o stanju skladišta trenutno nisu dostupne.
Cijena na upit
Vrsta kalibracije
Bez umjeravanja
1
Cijena na upit
Informacije o stanju skladišta trenutno nisu dostupne.
Vrsta kalibracije
Bez umjeravanja
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Aim-TTiProduct Type
Multimeter
Multimeter Type
Bench
Model Number
1908P
Resistance Resolution
1mΩ
Display Type
Digital
Functions Measured
Temperature, DC Voltage, AC Voltage, Capacitance, DC Current, Frequency, Resistance, AC Current
Maximum DC Voltage Measurement
1000V
Maximum DC Current Measurement
10A
Maximum Resistance Measurement
1kΩ
Maximum AC Current Measurement
10A
True RMS
Yes
DC Current Accuracy
0.05 %
AC Voltage Accuracy
0.3 %
AC Current Accuracy
0.35 %
DC Voltage Accuracy
0.02 %
DC Current Resolution
100nA dc
AC Current Resolution
100nA
DC Voltage Resolution
1 μV
Maximum Frequency
100kHz
Minimum Operating Temperature
5°C
Resistance Measurement Accuracy
±0.05 %
Maximum Operating Temperature
40°C
Length
260mm
Width
235 mm
Height
88mm
Weight
2kg
Standards/Approvals
No
Safety Category Level
CAT II
Battery Type
Rechargeable Ni-MH
Safety Category Voltage
600V
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
Aim-TTI 1908P Series Dual Measurement Bench Multimeter
Aim-TTi 1908 Series is a dual measurement, dual display bench-top/portable multimeter. It features continuity and diode test, automatic or manual ranging, linear scaling with offset, dB measurements, limits comparison, percentage deviation (%), min-max storage, power measurement in watts or VA, automatic data logging and external triggering. The logger function can store up to 500 readings from the main display in non-volatile memory. The two displays can be used to display a measurement along with the selected range (e.g. 100 Vdc), a measurement in two different units (e.g. AC volts and dBm), the result of a calculated function (e.g. value and % deviation), two parameters of one signal (e.g. AC and DC volts) or two different signals (e.g. AC volts and DC current). Software 1908-PC Link provides remote control of main functions and logging function with graphical and tabular displays (logged data can be exported to a CSV file). Model 1908P can be remotely controlled via its RS232, USB or LAN interface. Model 1908 (non ’P’) can only be controlled via USB.
For an optional GPIB module see stock number 144-5481.
Supplied with
IVI driver, LV/CVI driver, USB driver
Standards
EN61010-1, EN61010-2-030 & EN61010-2-033, EN61326-1 EMC