Allegro Microsystems Surface Hall Effect Sensor 3.8 V 24 V, SOT-23, 3-Pin

RS kataloški broj:: 680-7090Probna marka: Allegro MicrosystemsProizvođački broj:: A1101ELHLT-T
brand-logo
Prikaži sve u Motion Sensor ICs

Tehnička dokumentacija

Tehnički podaci

Product Type

Hall Effect Sensor

Sensor Type

Hall Effect Sensors

Technology

BiCMOS

Mount Type

Surface

Magnetic Type

Unipolar

Minimum Supply Voltage

3.8V

Package Type

SOT-23

Maximum Supply Voltage

24V

Minimum Operating Temperature

-40°C

Pin Count

3

Maximum Operating Temperature

85°C

Width

1.91 mm

Series

A1101

Height

0.95mm

Length

2.98mm

Standards/Approvals

No

Supply Current

7.5mA

Response Time

4μs

Automotive Standard

AEC-Q100

Detalji o proizvodu

A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems

The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.

Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.

The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.

The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.

Hall Effect Sensors, Allegro MicroSystems

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Informacije o stanju skladišta trenutno nisu dostupne.

€ 29,50

€ 1,18 Each (Supplied on a Reel) (bez PDV-a)

€ 36,88

€ 1,475 Each (Supplied on a Reel) (s PDV-om)

Allegro Microsystems Surface Hall Effect Sensor 3.8 V 24 V, SOT-23, 3-Pin
Odaberite vrstu pakiranja

€ 29,50

€ 1,18 Each (Supplied on a Reel) (bez PDV-a)

€ 36,88

€ 1,475 Each (Supplied on a Reel) (s PDV-om)

Allegro Microsystems Surface Hall Effect Sensor 3.8 V 24 V, SOT-23, 3-Pin

Informacije o stanju skladišta trenutno nisu dostupne.

Odaberite vrstu pakiranja

količinajedinična cijenaPo kolut
25 - 95€ 1,18€ 5,90
100+€ 1,15€ 5,75

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Tehnička dokumentacija

Tehnički podaci

Product Type

Hall Effect Sensor

Sensor Type

Hall Effect Sensors

Technology

BiCMOS

Mount Type

Surface

Magnetic Type

Unipolar

Minimum Supply Voltage

3.8V

Package Type

SOT-23

Maximum Supply Voltage

24V

Minimum Operating Temperature

-40°C

Pin Count

3

Maximum Operating Temperature

85°C

Width

1.91 mm

Series

A1101

Height

0.95mm

Length

2.98mm

Standards/Approvals

No

Supply Current

7.5mA

Response Time

4μs

Automotive Standard

AEC-Q100

Detalji o proizvodu

A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems

The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.

Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.

The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.

The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.

Hall Effect Sensors, Allegro MicroSystems

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više