Allegro Microsystems Through Hole Hall Effect Sensor 3 V 24 V, SIP, 3-Pin

RS kataloški broj:: 724-4660robna marka: Allegro MicrosystemsProizvođački broj:: A1120LUA-T
brand-logo
Prikaži sve u Motion Sensor ICs

Tehnička dokumentacija

Tehnički podaci

Product Type

Hall Effect Sensor

Sensor Type

Hall Effect Sensors

Technology

Chopper Stabilised Precision Hall Effect

Mount Type

Through Hole

Magnetic Type

Unipolar

Maximum Frequency Response

800kHz

Minimum Supply Voltage

3V

Package Type

SIP

Maximum Supply Voltage

24V

Minimum Operating Temperature

-40°C

Pin Count

3

Maximum Operating Temperature

150°C

Width

1.52 mm

Series

A1120

Height

3.02mm

Length

4.09mm

Standards/Approvals

100% matte tin plated, Pb-Free

Supply Current

4mA

Response Time

25μs

Automotive Standard

AEC-Q100

Detalji o proizvodu

A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems

The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.

They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.

For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.

Hall Effect Sensors, Allegro MicroSystems

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Informacije o stanju skladišta trenutno nisu dostupne.

€ 7,30

€ 1,46 komadno (u pakiranju od 5) (bez PDV-a)

€ 9,12

€ 1,825 komadno (u pakiranju od 5) (s PDV-om)

Allegro Microsystems Through Hole Hall Effect Sensor 3 V 24 V, SIP, 3-Pin
Odaberite vrstu pakiranja

€ 7,30

€ 1,46 komadno (u pakiranju od 5) (bez PDV-a)

€ 9,12

€ 1,825 komadno (u pakiranju od 5) (s PDV-om)

Allegro Microsystems Through Hole Hall Effect Sensor 3 V 24 V, SIP, 3-Pin

Informacije o stanju skladišta trenutno nisu dostupne.

Odaberite vrstu pakiranja

količinajedinična cijenaPo pakiranje
5 - 20€ 1,46€ 7,30
25 - 95€ 1,05€ 5,25
100+€ 0,97€ 4,85

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više

Tehnička dokumentacija

Tehnički podaci

Product Type

Hall Effect Sensor

Sensor Type

Hall Effect Sensors

Technology

Chopper Stabilised Precision Hall Effect

Mount Type

Through Hole

Magnetic Type

Unipolar

Maximum Frequency Response

800kHz

Minimum Supply Voltage

3V

Package Type

SIP

Maximum Supply Voltage

24V

Minimum Operating Temperature

-40°C

Pin Count

3

Maximum Operating Temperature

150°C

Width

1.52 mm

Series

A1120

Height

3.02mm

Length

4.09mm

Standards/Approvals

100% matte tin plated, Pb-Free

Supply Current

4mA

Response Time

25μs

Automotive Standard

AEC-Q100

Detalji o proizvodu

A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems

The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.

They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.

For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.

Hall Effect Sensors, Allegro MicroSystems

Zamisliti. Stvoriti. Surađivati

PRIDRUŽITE SE BESPLATNO

Bez skrivenih naknada!

design-spark
design-spark
  • Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
  • Pregledajte i doprinesite sadržaju internet stranice i foruma
  • Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Kliknite ovdje kako biste saznali više