Allegro Microsystems Through Hole Hall Effect Sensor 3 V 24 V, SIP, 3-Pin
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Allegro MicrosystemsProduct Type
Hall Effect Sensor
Sensor Type
Hall Effect Sensors
Technology
Chopper Stabilised BiCMOS
Mount Type
Through Hole
Magnetic Type
Bipolar
Maximum Frequency Response
800kHz
Minimum Supply Voltage
3V
Package Type
SIP
Maximum Supply Voltage
24V
Minimum Operating Temperature
-40°C
Pin Count
3
Maximum Operating Temperature
150°C
Width
1.52 mm
Series
A122
Height
3.02mm
Length
4.09mm
Standards/Approvals
Lead (Pb) Free
Supply Current
4mA
Response Time
25μs
Automotive Standard
AEC-Q100
Detalji o proizvodu
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.
Hall Effect Sensors, Allegro MicroSystems
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
€ 29,75
€ 1,19 Each (Supplied in a Bag) (bez PDV-a)
€ 37,19
€ 1,488 Each (Supplied in a Bag) (s PDV-om)
Proizvodno pakiranje (vrećica)
25
€ 29,75
€ 1,19 Each (Supplied in a Bag) (bez PDV-a)
€ 37,19
€ 1,488 Each (Supplied in a Bag) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
Proizvodno pakiranje (vrećica)
25
| količina | jedinična cijena | Po vrećica |
|---|---|---|
| 25 - 95 | € 1,19 | € 5,95 |
| 100 - 245 | € 1,02 | € 5,10 |
| 250+ | € 0,95 | € 4,75 |
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Allegro MicrosystemsProduct Type
Hall Effect Sensor
Sensor Type
Hall Effect Sensors
Technology
Chopper Stabilised BiCMOS
Mount Type
Through Hole
Magnetic Type
Bipolar
Maximum Frequency Response
800kHz
Minimum Supply Voltage
3V
Package Type
SIP
Maximum Supply Voltage
24V
Minimum Operating Temperature
-40°C
Pin Count
3
Maximum Operating Temperature
150°C
Width
1.52 mm
Series
A122
Height
3.02mm
Length
4.09mm
Standards/Approvals
Lead (Pb) Free
Supply Current
4mA
Response Time
25μs
Automotive Standard
AEC-Q100
Detalji o proizvodu
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.
Hall Effect Sensors, Allegro MicroSystems
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda