Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 3 V 3.6 V, Analogue, SIP, 3-Pin
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Allegro MicrosystemsProduct Type
Hall Effect Sensor
Sensor Type
Hall Effect Sensors
Number of Axis
1
Technology
BiCMOS
Mount Type
Through Hole
Magnetic Type
Linear
Interface Type
Analogue
Maximum Frequency Response
20kHz
Minimum Supply Voltage
3V
Package Type
SIP
Maximum Supply Voltage
3.6V
Minimum Operating Temperature
-40°C
Sensitivity
5mV/g
Pin Count
3
Maximum Operating Temperature
150°C
Width
1.52 mm
Series
A1318A1319
Height
3.02mm
Length
4.09mm
Standards/Approvals
No
Supply Current
7.7mA
Response Time
50μs
Automotive Standard
No
Zemlja podrijetla
Philippines
Detalji o proizvodu
Hall Effect Sensor ICs, Allegro Microsystems
The A1318LUA-2-T A1319LUA-5-T by Allegro Microsystems are Hall-effect sensor ICs that are designed to fit angular positions with a high accuracy and small package size.
The features of the Allegro A1318 and A1319 make them ideal for use in automotive and industrial applications requiring high accuracy, and operate across an extended temperature range, –40°C to 150°C linear Hall-effect sensor ICs have been designed specifically to meet these requirements. These temperature-stable devices are available in both surface-mount and through hole packages. The accuracy of each device is enhanced via end-of-line optimisation.
Each BiCMOS monolithic circuit integrates a Hall element, temperature-compensating circuitry to reduce the intrinsic sensitivity drift of the Hall element, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique. The A1318 and A1319 sensor ICs are offered in two package styles. The LH is a SOT-23W style, miniature, low profile package for surface-mount applications. The UA is a 3-pin, ultra-mini, single inline package (SIP) for through-hole mounting. Both packages are lead (Pb) free, with 100% matte tin leadframe plating.
Hall Effect Sensors, Allegro MicroSystems
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
€ 1.215,00
€ 2,43 komadno (u vrećici od 500) (bez PDV-a)
€ 1.518,75
€ 3,038 komadno (u vrećici od 500) (s PDV-om)
500
€ 1.215,00
€ 2,43 komadno (u vrećici od 500) (bez PDV-a)
€ 1.518,75
€ 3,038 komadno (u vrećici od 500) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
500
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Allegro MicrosystemsProduct Type
Hall Effect Sensor
Sensor Type
Hall Effect Sensors
Number of Axis
1
Technology
BiCMOS
Mount Type
Through Hole
Magnetic Type
Linear
Interface Type
Analogue
Maximum Frequency Response
20kHz
Minimum Supply Voltage
3V
Package Type
SIP
Maximum Supply Voltage
3.6V
Minimum Operating Temperature
-40°C
Sensitivity
5mV/g
Pin Count
3
Maximum Operating Temperature
150°C
Width
1.52 mm
Series
A1318A1319
Height
3.02mm
Length
4.09mm
Standards/Approvals
No
Supply Current
7.7mA
Response Time
50μs
Automotive Standard
No
Zemlja podrijetla
Philippines
Detalji o proizvodu
Hall Effect Sensor ICs, Allegro Microsystems
The A1318LUA-2-T A1319LUA-5-T by Allegro Microsystems are Hall-effect sensor ICs that are designed to fit angular positions with a high accuracy and small package size.
The features of the Allegro A1318 and A1319 make them ideal for use in automotive and industrial applications requiring high accuracy, and operate across an extended temperature range, –40°C to 150°C linear Hall-effect sensor ICs have been designed specifically to meet these requirements. These temperature-stable devices are available in both surface-mount and through hole packages. The accuracy of each device is enhanced via end-of-line optimisation.
Each BiCMOS monolithic circuit integrates a Hall element, temperature-compensating circuitry to reduce the intrinsic sensitivity drift of the Hall element, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique. The A1318 and A1319 sensor ICs are offered in two package styles. The LH is a SOT-23W style, miniature, low profile package for surface-mount applications. The UA is a 3-pin, ultra-mini, single inline package (SIP) for through-hole mounting. Both packages are lead (Pb) free, with 100% matte tin leadframe plating.
Hall Effect Sensors, Allegro MicroSystems
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda