Allegro Microsystems 1 Axis Through Hole Hall Effect Sensor 4.5 V 5.5 V, Analogue, SIP, 3-Pin
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Allegro MicrosystemsProduct Type
Hall Effect Sensor
Sensor Type
Hall Effect Sensors
Number of Axis
1
Technology
BiCMOS
Mount Type
Through Hole
Magnetic Type
Linear
Interface Type
Analogue
Maximum Frequency Response
17kHz
Minimum Supply Voltage
4.5V
Package Type
SIP
Maximum Supply Voltage
5.5V
Minimum Operating Temperature
-40°C
Sensitivity
2.5mV/g
Pin Count
3
Maximum Operating Temperature
150°C
Height
3.02mm
Length
4.09mm
Standards/Approvals
EMC
Series
A132
Supply Current
9mA
Automotive Standard
No
Response Time
32μs
Detalji o proizvodu
A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems
The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, and 2.5 mV/g, respectively.
Each IC integrates a Hall element, temperature-compensating circuitry, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique.
Available in a 3-pin ultra-mini SIP package, and a 3-pin surface mount SOT-23 package.
Hall Effect Sensors, Allegro MicroSystems
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
€ 585,00
€ 1,17 komadno (u vrećici od 500) (bez PDV-a)
€ 731,25
€ 1,462 komadno (u vrećici od 500) (s PDV-om)
500
€ 585,00
€ 1,17 komadno (u vrećici od 500) (bez PDV-a)
€ 731,25
€ 1,462 komadno (u vrećici od 500) (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
500
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Allegro MicrosystemsProduct Type
Hall Effect Sensor
Sensor Type
Hall Effect Sensors
Number of Axis
1
Technology
BiCMOS
Mount Type
Through Hole
Magnetic Type
Linear
Interface Type
Analogue
Maximum Frequency Response
17kHz
Minimum Supply Voltage
4.5V
Package Type
SIP
Maximum Supply Voltage
5.5V
Minimum Operating Temperature
-40°C
Sensitivity
2.5mV/g
Pin Count
3
Maximum Operating Temperature
150°C
Height
3.02mm
Length
4.09mm
Standards/Approvals
EMC
Series
A132
Supply Current
9mA
Automotive Standard
No
Response Time
32μs
Detalji o proizvodu
A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems
The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, and 2.5 mV/g, respectively.
Each IC integrates a Hall element, temperature-compensating circuitry, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique.
Available in a 3-pin ultra-mini SIP package, and a 3-pin surface mount SOT-23 package.
Hall Effect Sensors, Allegro MicroSystems
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda