Bartec Legend Plate for Use with Bartec Pushbutton
Tehnička dokumentacija
Tehnički podaci
Proizvođač
BartecProduct Type
Legend Plate
Accessory Type
Legend Plate
For Use With
Bartec Pushbutton
Standards/Approvals
RoHS
Zemlja podrijetla
Germany
Detalji o proizvodu
Label Holder
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 6,30
€ 6,30 komadno (bez PDV-a)
€ 7,88
€ 7,88 komadno (s PDV-om)
1
€ 6,30
€ 6,30 komadno (bez PDV-a)
€ 7,88
€ 7,88 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
| količina | jedinična cijena |
|---|---|
| 1 - 4 | € 6,30 |
| 5 - 9 | € 6,23 |
| 10+ | € 6,16 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
BartecProduct Type
Legend Plate
Accessory Type
Legend Plate
For Use With
Bartec Pushbutton
Standards/Approvals
RoHS
Zemlja podrijetla
Germany
Detalji o proizvodu
Label Holder
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.