EAO 31 Series Illuminated Push Button Switch, Latching, PCB, 16 mm Cutout, SPDT, IP40, 42 V 42 V
Tehnička dokumentacija
Tehnički podaci
Proizvođač
EAOActuator Colour
Black
Product Type
Push Button Switch
Switch Operation
Latching
Illuminated
Yes
Series
31
Panel Cutout Size
16 mm
Mount Type
PCB
Contact Configuration
SPDT
Terminal Type
Solder
IP Rating
IP40
Minimum Operating Temperature
-25°C
Contact DC Voltage
42V
Contact AC Voltage
42V
Actuator Style
Rectangular
Maximum Operating Temperature
55°C
Switch Configuration
2 NO
Width
18 mm
Switch Contact Current
0.1 A
Length
24mm
Standards/Approvals
RoHS
Legend
Blank
Zemlja podrijetla
Switzerland
Detalji o proizvodu
Illuminated Push Button Switch - EAO 31 Series
The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions.
The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting.
Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor.
All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance.
Standards
EN 61058
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Informacije o stanju skladišta trenutno nisu dostupne.
€ 52,66
€ 52,66 komadno (bez PDV-a)
€ 65,82
€ 65,82 komadno (s PDV-om)
1
€ 52,66
€ 52,66 komadno (bez PDV-a)
€ 65,82
€ 65,82 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
| količina | jedinična cijena |
|---|---|
| 1 - 9 | € 52,66 |
| 10+ | € 49,57 |
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda
Tehnička dokumentacija
Tehnički podaci
Proizvođač
EAOActuator Colour
Black
Product Type
Push Button Switch
Switch Operation
Latching
Illuminated
Yes
Series
31
Panel Cutout Size
16 mm
Mount Type
PCB
Contact Configuration
SPDT
Terminal Type
Solder
IP Rating
IP40
Minimum Operating Temperature
-25°C
Contact DC Voltage
42V
Contact AC Voltage
42V
Actuator Style
Rectangular
Maximum Operating Temperature
55°C
Switch Configuration
2 NO
Width
18 mm
Switch Contact Current
0.1 A
Length
24mm
Standards/Approvals
RoHS
Legend
Blank
Zemlja podrijetla
Switzerland
Detalji o proizvodu
Illuminated Push Button Switch - EAO 31 Series
The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions.
The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting.
Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor.
All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance.
Standards
EN 61058
Zamisliti. Stvoriti. Surađivati
PRIDRUŽITE SE BESPLATNO
Bez skrivenih naknada!
- Preuzmite i koristite naš softver DesignSpark za svoje PCB i 3D mehaničke dizajne
- Pregledajte i doprinesite sadržaju internet stranice i foruma
- Preuzmite 3D modele, sheme i otiske s više od milijun proizvoda