Tehnička dokumentacija
Tehnički podaci
Proizvođač
Eccel Technology LtdProduct Type
RFID Reader
Sub Type
RF Module
Component Type
Reader
Maximum RF Data Rate
921600bps
Frequency
13.56MHz
Mount Type
Panel
Interface Type
UART
Minimum Supply Voltage
2.5V
Maximum Supply Voltage
3.6V
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
85°C
Length
50mm
Standards/Approvals
RoHS
Series
UART-B1
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
The UART-B1 is a low cost full RFID/NFC read/write device with UART interface. Can operate in host connected mode or stand alone mode. Supports Mifare Classic 1k & 4k, NTAG2xx and Ultralight. Additionally, you can read serial numbers from Mifare Plus, Mifare DESfire and any transponder compatible with the ISO14443A standard. The UART-B1 is based on our RFID-B1 module but is equipped with an additional integral antenna, an LED for tag in the field indication/ interrupt, mounting holes and flexible plated connection holes.The UART-B1 is an ideal choice if the user wishes to add RFID capability to their design quickly and easily.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 65,16
€ 65,16 komadno (bez PDV-a)
€ 81,45
€ 81,45 komadno (s PDV-om)
1
€ 65,16
€ 65,16 komadno (bez PDV-a)
€ 81,45
€ 81,45 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
| količina | jedinična cijena |
|---|---|
| 1 - 4 | € 65,16 |
| 5+ | € 64,46 |
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Eccel Technology LtdProduct Type
RFID Reader
Sub Type
RF Module
Component Type
Reader
Maximum RF Data Rate
921600bps
Frequency
13.56MHz
Mount Type
Panel
Interface Type
UART
Minimum Supply Voltage
2.5V
Maximum Supply Voltage
3.6V
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
85°C
Length
50mm
Standards/Approvals
RoHS
Series
UART-B1
Zemlja podrijetla
United Kingdom
Detalji o proizvodu
The UART-B1 is a low cost full RFID/NFC read/write device with UART interface. Can operate in host connected mode or stand alone mode. Supports Mifare Classic 1k & 4k, NTAG2xx and Ultralight. Additionally, you can read serial numbers from Mifare Plus, Mifare DESfire and any transponder compatible with the ISO14443A standard. The UART-B1 is based on our RFID-B1 module but is equipped with an additional integral antenna, an LED for tag in the field indication/ interrupt, mounting holes and flexible plated connection holes.The UART-B1 is an ideal choice if the user wishes to add RFID capability to their design quickly and easily.
