Tehnička dokumentacija
Tehnički podaci
Proizvođač
Endress+HauserProduct Type
Level Sensor
Device Type
Point Level
Mount Type
Threaded Mount
Housing Material
Polyphenylene Sulphide
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
70°C
Maximum DC Voltage
45V dc
Maximum Current
30mA
Maximum Pressure
6bar
Standards/Approvals
EN 60068-2-64 (IEC 68-2-64)
Hazardous Area Certification
ATEX
Series
FTC262
Zemlja podrijetla
Germany
Detalji o proizvodu
The Endress+Hauser Capacitive point level switch features buildup compensation and requires no calibration. Key features include a relay output (potential-free change-over contact / SPDT) with AC or DC power, PNP output with three-wire DC power, and a complete unit consisting of the probe and electronic insert for simple mounting. It offers Active build-up compensation, ensuring an accurate switch point and high operational safety.
The Minicap FTC260 is a rod probe for point level detection in bulk solids such as grain products, milk powder or cement. The device can be used without calibration and is particularly suited for applications involving aggressive media and heavy build-up.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 800,20
€ 800,20 komadno (bez PDV-a)
1
€ 800,20
€ 800,20 komadno (bez PDV-a)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
Endress+HauserProduct Type
Level Sensor
Device Type
Point Level
Mount Type
Threaded Mount
Housing Material
Polyphenylene Sulphide
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
70°C
Maximum DC Voltage
45V dc
Maximum Current
30mA
Maximum Pressure
6bar
Standards/Approvals
EN 60068-2-64 (IEC 68-2-64)
Hazardous Area Certification
ATEX
Series
FTC262
Zemlja podrijetla
Germany
Detalji o proizvodu
The Endress+Hauser Capacitive point level switch features buildup compensation and requires no calibration. Key features include a relay output (potential-free change-over contact / SPDT) with AC or DC power, PNP output with three-wire DC power, and a complete unit consisting of the probe and electronic insert for simple mounting. It offers Active build-up compensation, ensuring an accurate switch point and high operational safety.
The Minicap FTC260 is a rod probe for point level detection in bulk solids such as grain products, milk powder or cement. The device can be used without calibration and is particularly suited for applications involving aggressive media and heavy build-up.
