Tehnička dokumentacija
Tehnički podaci
Proizvođač
EnOceanProduct Type
RF Module
Sub Type
RF Module
Component Type
Module
Maximum RF Data Rate
125kbps
Frequency
902MHz
Interface Type
USB, Serial
Minimum Operating Temperature
0°C
Maximum Operating Temperature
40°C
Width
23 mm
Length
66mm
Height
9mm
Standards/Approvals
R&TTE EN 300 220, RoHS, FCC CFR-47 Part15, CE
Series
USB 300
Zemlja podrijetla
Hungary
Detalji o proizvodu
USB Gateway Transceiver Module USB 300
USB 300 is a small USB stick which connects PCs and smart home servers to EnOcean wireless products. USB 300 is equipped with the TCM 310 transceiver gateway board and provides a bi-directional interface between an EnOcean ISM-band wireless channel and a USB serial bus. Radio messages are sent and received via an externally connected USB host. The USB 300 also provides signal strength information. Additional control commands can be sent from the host to USB 300, e.g. to configure repeater functionality.
Informacije o stanju skladišta trenutno nisu dostupne.
€ 62,41
€ 62,41 komadno (bez PDV-a)
€ 78,01
€ 78,01 komadno (s PDV-om)
1
€ 62,41
€ 62,41 komadno (bez PDV-a)
€ 78,01
€ 78,01 komadno (s PDV-om)
Informacije o stanju skladišta trenutno nisu dostupne.
1
Tehnička dokumentacija
Tehnički podaci
Proizvođač
EnOceanProduct Type
RF Module
Sub Type
RF Module
Component Type
Module
Maximum RF Data Rate
125kbps
Frequency
902MHz
Interface Type
USB, Serial
Minimum Operating Temperature
0°C
Maximum Operating Temperature
40°C
Width
23 mm
Length
66mm
Height
9mm
Standards/Approvals
R&TTE EN 300 220, RoHS, FCC CFR-47 Part15, CE
Series
USB 300
Zemlja podrijetla
Hungary
Detalji o proizvodu
USB Gateway Transceiver Module USB 300
USB 300 is a small USB stick which connects PCs and smart home servers to EnOcean wireless products. USB 300 is equipped with the TCM 310 transceiver gateway board and provides a bi-directional interface between an EnOcean ISM-band wireless channel and a USB serial bus. Radio messages are sent and received via an externally connected USB host. The USB 300 also provides signal strength information. Additional control commands can be sent from the host to USB 300, e.g. to configure repeater functionality.
